2x450W stereo audio amplifier
ID: 1181174
5906623443499
zł336.80
Tax included
zł273.82 tax excl.
Class D digital audio amplifier. It has two channels with a power of 450 W and can be used with 8 Ω speakers. Powered by AC voltage 2x30V
Description
Class D digital audio amplifier. It has two channels with a power of 450 W and can be used with loudspeakers with an impedance of 8 Ω. It is powered with the voltage of AC 2x30 V. The loudspeakers and the input are connected using the included 3-wire cables. It works well as an amplifier for a home audio system.
Features
- Class D audio amplifier
- Power: 2 x 450 W
- Speaker impedance: 8 Ω
- Transmission frequency: 20 Hz to 20 kHz
- S/N: 45 dB
- T.h.d .: 0.05%
- Input sensitivity: 800 mV
- Power supply: AC 2x30 V 50 Hz
- Dimensions: 145 x 215 mm
Kit contains
- 2x450W stereo audio amplifier
- A set of wires
1181174
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
zł117.56
Delivery date unknown
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 300 W and can work with 4 Ω speakers. Powered by alternating voltage 230 V
zł435.08
Delivery date unknown
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 300 W and can work with 4 Ω speakers. Powered by alternating voltage 230 V
zł509.10
Delivery date unknown
No product available!
Audio amplifier based on the TPA3255 system with a power of 600 W with an active filter. Dedicated to the bass column (subwoofer)
zł273.64
Delivery date unknown
No product available!
Other products in the same category (16)
Module with LM386 audio amplifier and loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020001
zł25.26
24h
Available quantity: 2
Available
Single-channel audio amplifier up to 100 W.
zł65.33
24h
Available quantity: 2
Available
Module with an AB class amplifier based on the Boomer® LM4853 system. It can work in two modes: mono (power 1.5 W, load 4 Ω) or stereo (power 300 mW, load 8 Ω). It has a potentiometer for power control and gain control for the left and right channel. SparkFun DEV-14475
zł95.58
24h
Available quantity: 2
Available
Pmod I2S2 is a module with 24-bit A / C and D / C audio converters derived from standard 3,5 mm Jack connectors. Thanks to them, it is possible to send and receive stereo audio signals using the I2S protocol. Digilent 410-379
zł128.35
24h
Available quantity: 9
Available
Module containing TSH82 operational amplifier from STMicroelectronics. The system has two built-in amplifiers and each of them is available separately on the pins of the board as inverting amplifiers. Sparkfun BOB-14874
zł43.32
24h
Available quantity: 2
Available
LM386 audio amplifier module. It is supplied with the voltage ranging from 4 to 12 V. The set includes an 8 Ω, 0.5 W loudspeaker. DFRobot DFR0064
zł61.97
24h
Available quantity: 1
Available
The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.42
4 weeks
No product available!
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.67
4 weeks
No product available!
Stereo audio amplifier with a power of 40 W (2 x 20 W) powered with the voltage of 12 V. Equipped with an audio input in the form of two chinch sockets and an audio jack 3.5 mm input
zł57.76
24h
Available quantity: 6
Available
LM386 audio amplifier module in a set with a loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 101020853
zł57.54
4 weeks
No product available!
Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357
zł11.89
24h
Available quantity: 2
Available
Class D PAM8403 stereo digital audio amplifier module. The system allows you to connect two speakers from 4 to 8 Ω with a power of 3 W per channel. modPAM8403
zł2.36
4 weeks
No product available!
A sound card in the form of a small device with a USB plug, designed to work with the Raspberry Pi and NVIDIA Jetson Nano minicomputer. Waveshare USB TO AUDIO
zł31.89
24h
Available quantity: 10
Available
Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano
zł79.08
24h
Available quantity: 1
Available
Audio module with DAC, headphone amplifier and display, designed to work with the Raspberry Pi. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM482
zł156.85
24h
Available quantity: 4
Available
Audio module with DAC, amplifier, display and loudspeaker, designed to work with the Raspberry Pi. Pimoroni PIM485
zł156.70
24h
Available quantity: 2
Available
Class D digital audio amplifier. It has two channels with a power of 450 W and can be used with 8 Ω speakers. Powered by AC voltage 2x30V