HiFi audio amplifier TPA3116 50W+50W+100W 12V-24V
ID: 587674
5906623475544
zł117.56
Tax included
zł95.58 tax excl.
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
Description
Digital audio amplifier module based on the TPA3116 chip. It has two channels with a power of 50 W (left and right) and one 100 W (bass) and can work with speakers with an impedance from 4 to 8 Ω (left and work) and from 2 to 8 Ω (bass). The module is supplied with the voltage in the range from 12 to 24 V. The board has 5 potentiometers to adjust the volume, high and low tones. The audio input can be connected via the Jack 3.5 mm connector or the 3-pin AUDIO IN connector, while the outputs are led out on screw connectors. It works well as an element of a home audio system.
Features
- Power supply: DC jack or terminal block
- Audio input: Jack 3.5mm socket or 3-pin audio connector
- Potentiometer for adjusting the bass volume
- Potentiometer to adjust the volume of the left and right channels
- Potentiometer for treble adjustment
- Switch / potentiometer to adjust the total volume
- Audio input sensitivity: 600-800mV
- Frequency response: 20Hz-20kHz
- Speaker impedance: Left and right channels: 4-8 ohms, bass channel: 2-8 ohms
- Operating voltage range: DC 12 to 24V
- Power: up to 50 W (left and right channel), 100W (bass channel)
- Dimensions: 101 x 100 x 30 mm
Kit contains
- TPA3116 3-channel audio amplifier
- 3-pin cable
- 5 x potentiometer cap
- A set of screws
587674
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.42
24h
Available quantity: 3
Available
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.67
24h
Available quantity: 14
Available
Other products in the same category (16)
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 300 W and can work with 4 Ω speakers. Powered by alternating voltage 230 V
zł509.10
4 weeks
No product available!
TDA7297 stereo audio digital amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W
zł14.88
4 weeks
No product available!
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
zł159.64
24h
Available quantity: 4
Available
100 W audio signal converter that reduces the speaker signal from the player to the level of RCA inputs. It allows you to connect the radio to an external power amplifier
zł44.54
4 weeks
No product available!
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 100 W
zł129.38
4 weeks
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
zł138.20
4 weeks
No product available!
The TPA3116D2 amplifier module is a digital class D amplifier, offering 2x50W of power for stereo channels and 100W for the subwoofer, powered by 12V-24V. Thanks to the built-in NE5532 low-pass filter, it provides clean bass sound, and three potentiometers allow you to adjust the volume and cutoff frequency.
zł65.92
24h
Available quantity: 4
Available
Stereo audio amplifier based on the TDA7492 chip. It can be powered with the voltage from 10 to 26 V and has two outputs with a power of 50 W
zł47.10
24h
Available quantity: 10
Available
The NE5532 XH-M164 preamplifier module is a compact 12V audio device that improves sound quality thanks to the NE5532 chip. It has a convenient output interface and excellent performance, perfect for audio projects such as amplifiers and sound processors.
zł23.90
24h
Available quantity: 11
Available
Zeenko ZK06-BM is a portable, low-noise RF amplifier with battery power, operating in the 10 MHz – 6 GHz band. It offers high gain stability, good overload resistance and full compatibility with spectrum analyzers, including tinySA ULTRA. Particularly recommended for measurement applications and antenna systems.
zł74.26
6 weeks
No product available!
LM386 audio amplifier module. It is supplied with the voltage ranging from 4 to 12 V. The set includes an 8 Ω, 0.5 W loudspeaker. DFRobot DFR0064
zł61.97
24h
Available quantity: 1
Available
No product available!
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
zł138.45
4 weeks
No product available!
Audio preamplifier based on the NE5532 chip. Powered with DC voltage in the range from 9 to 35 V (does not require symmetrical voltage)
zł15.47
4 weeks
No product available!
Single-channel audio amplifier up to 100 W.
zł65.33
24h
Available quantity: 2
Available
Audio amplifier with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication
zł305.11
4 weeks
No product available!
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)