Tube HiFi stereo 3W + 3W (silver)
ID: 588127
5906623448715
zł606.19
Tax included
zł492.84 tax excl.
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
Description
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. It allows you to adjust the volume using the built-in potentiometer and give a "sweet" sound color characteristic for devices with vacuum tubes. The amplifier allows you to connect two audio input channels through RCA connectors and outputs in the form of 3 W speakers and 4 Ω or 8 Ω impedance through banana connectors. It is powered by AC 230 V mains voltage via an IEC C14 socket (standard power socket used, for example, in computers).
The electronic module has been placed in a nice, aluminum housing, so it can be used not only as part of the audio system, but also as an element of decor. It is a good choice for both novice users and audiophiles.
Features
- Stereo amplifier
- Type: tube 6P1 (power amplifier), 6J1 (voltage amplifier)
- Frequency response: 30 Hz to 40 kHz (-1dB)
- Input sensitivity: 500 mV
- SNR: 80 dB
- Adjusting the volume level
- Input impedance: 10 kΩ
- Output power: 2 x 3 W with an impedance of 4 Ω or 8 Ω
- Input: RCA connectors
- Output: banana connectors
- Power switch
- Silver colour
- Power supply: AC 100 to 250 V (IEC C14 socket)
- Dimensions: 124 x 132 x 166 mm
Kit contains
- HiFi tube amplifier
- 2 x 6P1
- 2 x 6J1 lamp
588127
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
zł613.40
Delivery date unknown
No product available!
A stereo tube preamplifier based on 6K4 tubes. Designed for use with active speakers or an additional amplifier and passive speakers. SUCA-AUDIO TUBE-T1
zł253.07
Delivery date unknown
No product available!
The Lanberg audio cable with a length of 500 cm enables stereo sound transmission via 3.5 mm minijack and 2x RCA (Chinch) connectors, ensuring compatibility with a wide range of devices such as computers, smartphones, TVs, and multimedia players. With high-quality craftsmanship, nickel-plated contacts, and a plastic braid, it guarantees excellent signal conductivity, minimal interference, and reliability. Its solid construction makes it suitable even for more demanding users. CA-MJRC-10CC-0050-BK
zł4.71
Delivery date unknown
No product available!
Other products in the same category (16)
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
zł117.56
4 weeks
No product available!
TPA3110 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W
zł14.49
24h
Available quantity: 2
Available
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
zł123.18
4 weeks
No product available!
Zeenko ZK06-UM is a precise, wideband RF amplifier for the 10 MHz – 6 GHz range, designed for high-sensitivity measurements with low interference. Powered via USB-C and optimized for use with devices such as the tinySA ULTRA, it offers high linearity and a low noise figure across the entire supported band.
zł55.69
24h
Available quantity: 10
Available
Sound terminal expansion board based on STA350BW for STM32 Nucleo
zł194.73
1 weeks
No product available!
Class A power amplifier with one channel (mono) with the power of 10 W. Built on the popular design of J. Hood from 1969.
zł70.12
4 weeks
No product available!
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
zł53.90
24h
Available quantity: 2
Available
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 26 V and has two outputs with a power of 120 W
zł46.70
24h
Available quantity: 49
Available
The XH-A902 preamplifier module with the NE5532 chip provides a fivefold increase in sound power, operating in the voltage range of 12-30V. Using the renowned NE5532 chip, it offers excellent amplification in two channels,
zł14.81
4 weeks
No product available!
Class D PAM8406 stereo digital audio amplifier module. The system allows you to connect two speakers with an impedance of 4 to 8 Ω and a power of 5 W per channel
zł4.72
4 weeks
No product available!
Digital stereo audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 100 W and can work with speakers from 4 to 8 Ω. Powered with voltage from 5 to 24 V. 1002M
zł76.19
4 weeks
No product available!
Module with the WM8960 audio codec, which allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Waveshare WM8960 Audio HAT
zł88.09
4 weeks
No product available!
Module dedicated to the audio preamplifier with DIP8 socket for NE5532, OPA2134, OPA2604 or AD826 chips
zł8.23
24h
Available quantity: 10
Available
Class D stereo sound amplifier based on the Texas Instruments TPA2016D2 circuit. It can work with 4 Ω speakers with power up to 2.8 W or 8 Ω with power up to 1.7 W in stereo mode. SparkFun DEV-20690
zł71.60
24h
Available quantity: 2
Available
Class AB audio amplifier with three output channels. It can be powered with AC voltage from 8 to 18 V and has two outputs with a power of 18 W (left and right) and one with a power of 20 W (bass)
zł48.60
4 weeks
No product available!
Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano
zł78.79
24h
Available quantity: 2
Available
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω