- Out-of-Stock
RAM memory, 100M Ethernet interface, AC97 and DVI-D codec, as well as IO interface expansion connectors. The base plate facilitates access to the IO FPGA, on which the IO connectors are divided into standard connectors with a 2.54 mm pitch. Numerous peripherals, including LCD display, 7-segment LED display, microSD card slot, VGA connector, audio outputs and buttons make it easy to create new projects. The board has JTAG signals on a standard Xilinx Platform Cable compatible connector. The set will be used for prototyping, signal processing as well as creating and testing circuits. It can be used as an educational board in education. Full documentation is available on the product page.

Manufacturer
Responsible person
FPGA development board with Spartan 6 chip and 16 Mb SPI Flash memory, 8 LEDs and buttons. Numato Lab FPGA002
Xilinx Spartan-6 FPGA module with built-in DDR memory. Pins are available on low-profile connectors on the back of the module. Numato Lab FPGA004
No product available!
Development kit with Xilinx Spartan-6 FPGA with built-in DDR memory and IO interface expansion connectors. The base board facilitates access to the FPGA IO. Numato Lab FPGA005
No product available!
The module enables connection of two devices with I2C interface working with different voltage levels. MOD-28.Z
No product available!
It is used to monitor the temperature measurement and other parameters. The expansion module has an I2C / 1-Wire converter (DS2482) through which DS18B20 temperature sensors can be connected using two or three wires. MOD-29.Z
No product available!
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
No product available!
Universal module with LM358 operational amplifier. Depending on the additional elements installed, the amplifier can be freely configured, eg as a reversing, non-inverting amplifier, voltage follower or an integrating amplifier. MOD-32.Z
No product available!
No product available!
The modally controlled modulation module MOD-34 / BZ allows wireless load control with a current consumption of up to 10A via a relay. Includes wireless module nRF24l01.
No product available!
No product available!
No product available!
No product available!
The module with the TXB0108 system enables the connection of systems operating with different voltage levels. It has 8-channels and is 2-way. The transmission direction of each channel is detected automatically. MOD-38.Z
No product available!
No product available!
The STM32 eXploreM0 module contains a 32-bit microcontroller with ARM Cortex M0 core, STM32F051C8T6 (64 kB Flash memory, 8 kB RAM, 48 MHz, HDMI-CEC, I2C, IrDA, LIN, SPI, UART / USART). The USB / UART converter allows programming of the microcontroller via a USB cable. MOD-40.Z
No product available!
The STM32 eXploreM0 + module contains a 32-bit microcontroller with ARM Cortex M0 + core, STM32L051C8T6 (64 kB of Flash memory, 8 kB RAM, 32 MHz, I2C, IrDA, SPI, UART / USART). The built-in USB / UART converter enables programming of the microcontroller via a USB cable. MOD-41.Z
No product available!
The modules are used to operate 7 touch fields. This is possible thanks to the built-in AT42QT1070 capacitive touch sensor. The derived I2C interface serves for communication.
No product available!
No product available!
Development kit with Xilinx Spartan-6 FPGA. Equipped with displays, buttons, audio and video outputs and a breadboard. Numato Lab WXDE001