- Out-of-Stock
Elbert V2 Spartan 3A FPGA Development Board - development board with Xilinx Spartan 3A XC3S50A
ID: 1180992
5906623411641
Development kit with Xilinx Spartan 3A FPGA. Equipped with a display, buttons, audio and video output and a microSD slot. Numato Lab FPGAX0006
Description
Development kit with Xilinx Spartan 3A FPGA. The base plate facilitates access to the IO FPGA, on which the connectors are divided into standard connectors with a 2.54 mm pitch. Numerous peripherals, including a 7-segment LED display, a microSD card slot and buttons, make it easy to create new projects. The user has at his disposal a VGA output, audio Jack and a USB interface, which makes it easy to configure the system without the need for an additional programmer. The set will be used for prototyping, signal processing as well as creating and testing circuits. It can be used as an educational board. Full documentation is available on the product page.
Features
- Spartan XC3S50A FPGA in TQG144 housing
- 16MB SPI flash memory (M25P16)
- USB 2.0 interface for programming the built-in flash memory
- FPGA configuration via JTAG and USB
- 8 LEDs, six buttons and an 8-way DIP switch
- VGA output
- Stereo audio output
- Micro SD card slot
- Three 7-segment displays
- 39 IO for user-defined purposes
- Voltage stabilizers
- Dimensions: 122 x 86 mm
1180992
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-B
zł16,029.90
Delivery date unknown
No product available!
Development kit with Xilinx Artix 7 FPGA. Equipped with display, buttons, video outputs, Ethernet and microSD slot. Numato Lab NLFX1001
zł1,277.96
24h
Available quantity: 2
Available
FPGA development board with Xilinx Kintex-7 chip with 4 GB DDR3L SDRAM memory. Equipped with a fast PCIe interface. Numato Lab FPGA014A
zł8,161.98
Delivery date unknown
No product available!
Other products in the same category (16)
Flex Cable for Raspberry Pi Camera - 200mm / 8". Adafruit 1647
Retired
No product available!
MYIR MYC-C7Z010 is a single board module based on the MYC-C7Z010 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
Retired
No product available!
No product available!
AVT kit for self-assembling LEDs, contains a set of elements. AVT1844 B
Retired
No product available!
Assembled AVT set, Christmas, shining Christmas tree LED. AVT1844 C
Retired
No product available!
The sensor detects dangerous carbon monoxide and carbon monoxide, signals a gas leak and the presence of carbon monoxide in rooms. URZ0409
Retired
No product available!
Female-female 10-core connection cable, 15 cm long with connectors of 1.27 mm pitch. Adafruit 1675
Retired
No product available!
32GB microSDHC Memory Card with SD Adapter, class 4, Kingston
Delivery date unknown
No product available!
Development kit chipKIT DP32 equipped with PIC32MX250F128B microcontroller (40/50 Mhz, 128 kB Flash, 32 kB RAM), prototype area with solder pads, potentiometer, 4 LED diodes, 2 buttons and soldering pads for EEPROM memory and analog temperature sensor. Digilent 410-280P-KIT
Retired
No product available!
large 14x21 hole prototyping area on an expansion card compatible with the myRIO Expansion Port (MXP). 6002-210-008P
Retired
No product available!
Perfect for connecting devices using Wi-Fi, Ethernet and Power over Ethernet options, the Yun combines an ATmega32u4 microcontroller with a Linux based Linino WiFi System on Chip module. A000003
Retired
No product available!
LPCXpresso4337 starter board with a dual-core LCP4337 microcontroller (Cortex-M4F + Cortex-M0 +). The set is equipped with a built-in programmer, buttons, diode, SPI Flash quad flash and USB - UART konwetrer
Retired
No product available!
Starter board LPCXpresso18S37 with LPC18S37 microcontroller (Cortex-M3). The set is equipped with a built-in programmer, buttons, diode, SPI Flash quad flash and USB - UART konwetrer
Retired
No product available!
Aluminum extensometer beam, allowing weight measurement up to 100 kilograms. It has four wires. It is used in kitchen scales and portable scales, max 100 kg, 20x23x94, 21 cm cable, RoHS
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
Retired
No product available!
The DDS generator with a readable alphanumeric display allows you to generate sinus, rectangular or triangle waveforms. The device can also be used for frequency measurement in the 1Hz-60MHz range
Retired
No product available!
Development kit with Xilinx Spartan 3A FPGA. Equipped with a display, buttons, audio and video output and a microSD slot. Numato Lab FPGAX0006