- Out-of-Stock
AVT2925 / 3 A
ID: 189834
CYPISEK - CENTRIFUGE GENERATOR (VERSION 2) - PRINTED PLATE
CYPISEK - CENTRIFUGE GENERATOR (VERSION 2) - PRINTED PLATE
Producer: AVT
AVT2925 / 3 A Cypress - generator version 2
The receiver is designed to receive amateur stations operating in the 3.5 MHz band, working with phonic (SSB) and telegraphic (CW) emissions. It was conceived as 'holiday' or 'holiday' equipment. It is intended to be easy to build. Low power consumption allows you to power the receiver from a battery or accumulator.
A tunable generator should be built into the first version of the receiver. Building a really stable generator has always been a challenge for radio amateurs.
The second version of the receiver differs in that a digital scale is used to measure and read the frequency. There are two potentiometers for operation on the front panel, we can also make a simple ARW chip with the level indicator of the received signal. You can do it on a small universal plate (or in a spider).
The printed circuit board and documentation are included.
Detailed description EdW 12/09, EdW 01/10
Kits directly related to AVT2925:
- AVT2925 / 1 Cypress - receiver - main board
- AVT2925 / 2 Cypisek - generator version 1
- AVT2925 / 3 Cypisek - generator version 2
- AVT2925 / 4 Cypisek - antenna amplifier
- AVT2925 / 5 Cypisek - TX module
- AVT2925 / 6 Cypisek - commutation
- AVT2925 / 7 Cypisek - separator
Download
189834
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
AVT kit for self-assembly of a universal 2-channel relay module. AVT1914 B
Retired
No product available!
Assembled universal 2-channel relay module. AVT1914 C
Retired
No product available!
Printed circuit board and programmed system for the electromagnetic transom control. AVT1919 A +
Retired
No product available!
AVT kit for self-assembly of the electromagnetic lock controller. AVT1919 B
Retired
No product available!
Assembled electromagnetic lock controller. AVT1919 C
Retired
No product available!
Printed circuit board and programmed system for the alarm control panel cooperating with the motion sensor. AVT1925 A +
Retired
No product available!
AVT kit for self-assembly of the alarm control panel cooperating with the motion sensor. AVT1925 B
Retired
No product available!
Assembled alarm control panel cooperating with the motion sensor. AVT1925 C
Retired
No product available!
AVT kit for self-assembly of the power distributor. AVT1930 B
Retired
No product available!
Assembled power divider, designed to supply several receivers from one voltage source with more power. AVT1930 C
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
Retired
No product available!
Flexible PVC cover for 6M3 connector, for ØD = 3.5mm cable, length L = 24mm, width W = 6.5mm, black, RoHS
24h
Available quantity: 20
No product available!
The AM receiver of the DCF77 signal with the MAS6180 system, allows to receive the frames of the synchronization signal from the time standard, using the carrier frequency of 77.5kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77
Retired
No product available!
Module with Tegra X1 SoC system containing four 64-bit ARM Cortex A57 cores and a Maxwell graphic layout consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX1
Retired
No product available!
Arducam-F Rev.C+ Camera module shield with OV2640 for Arduino UNO MEGA2560 DUE. ArduCam B0051+B0011
Retired
No product available!
CYPISEK - CENTRIFUGE GENERATOR (VERSION 2) - PRINTED PLATE