.png)
- Out-of-Stock
Pololu 3125 - Zumo 32U4 Robot (Assembled with 50:1 HP Motors)
ID: 566232
A minisumo robot on a tracked chassis with Pololu 50:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3125
Our offer includes a newer version of the robot with an OLED display:
Zumo 32U4 OLED Robot (Assembled with 50:1 HP Motors)
Description
A minisumo class robot from Pololu based on a tracked chassis. Dimensions (approx. 100 mm x 100 mm) and weight (approx. 300 g with batteries) allow the robot to be used as a minisumo platform in popular competitions for pupils and students organized around the world.
Zumo 32U4 is a robot based on ATmega32U4 MCU compatible with Arduino. It has two H-bridge motor controllers and a series of integrated sensors, including a pair of quadrature encoders for closed-loop motor control, a complete inertial measurement unit (3-axis accelerometer, gyro and magnetometer), five reflection sensors for line or edge detection, and proximity sensors forward and sideways for detecting obstacles and determining the distance from an obstacle. The three buttons offer a convenient user input interface, while the LCD display, buzzer and LEDs give feedback to the operator. The robot is equipped with two Pololu 50:1 HP motors with a metal gear.
Attention!
The kit does not include the four AA batteries necessary to start the robot. They must be purchased separately.The robot has a built-in microcontroller with an Arduino Leonardo compatible bootloader. As a result, the programming process of the robot does not require an additional programmer, and the controller is programmed via the USB port.
The robot has extensive support in the form of Arduino libraries for all the systems available on the board. It is also available as a set with a complex robot in a version with motors with a gear 75:1, 100:1 and as a kit for self-assembly.
Features
- Two Pololu 50:1 HP motors motors with a metal gear
- Module with IR reflective sensors for line and edge detection
- Two single-channel DRV8838 motor controllers
- Piezoelectric buzzer
- LSM303D 3-axis digital accelerometer and magnetometer
- L3GD20H 3-axis digital gyroscope
- 3.3 V and 5 V stabilizer
- Prototype area for the user
- Arduino libraries
- Power supply: 4 x AA battery (not included)
- Dimensions: 98 x 98 x 39 mm
- Weight: 170 g (without batteries)
566232
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł95.17
24h
Available quantity: 2
Available
Tracked chassis kit for the Pololu Zumo minisumo robot. The kit does not contain motors, batteries and electronic components. Pololu 1418
zł102.86
24h
Available quantity: 1
Available
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 4990
zł562.53
Delivery date unknown
No product available!
Other products in the same category (16)
ArduCAM 8MP IMX179 Autofocus USB Camera - USB camera module with IMX179 8MP sensor and microphone...
Camera module with USB interface. It is equipped with an IMX179 CMOS sensor with a resolution of 8 MP and a lens with a 63° viewing angle with autofocus function. It has a built-in digital microphone. Version with metal case. ArduCAM B0447C
Retired
No product available!
The Aneng Q1 is a digital multimeter that enables measurements of AC and DC current, AC and DC voltage, temperature and resistance. The kit includes the multimeter, measuring leads, a temperature sensor, a storage bag and a 16-piece measurment set.
Retired
No product available!
TF Cloud V1.0 is a wireless file transmission module that allows data transfer between a computer and a 3D printer without the need for an SD card. It is based on the ESP-12S module with the ESP8266 chip, ensuring stable data transmission via Wi-Fi.
Retired
No product available!
ST485BDR is a low-current RS-485/RS-422 transceiver with one transmitter and one receiver, enabling bidirectional half-duplex communication. It is characterized by low current consumption (300 µA) and protection against overload and overheating, which makes it ideal for various industrial applications.
Retired
No product available!
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-200mm
Retired
No product available!
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm
Retired
No product available!
This adapter allows for quick and convenient connection of ePaper displays to Seeed Studio XIAO modules. The board features a 24-pin FPC connector and an additional 2.54 mm connector, making it compatible with platforms such as Arduino UNO and Raspberry Pi. Its plug-and-play design and fully exposed signal pins allow for easy integration with IoT projects, automation, and educational devices. Seeed Studio 105990172
Retired
No product available!
7-color e-Paper display with a diagonal of 5.65" and a resolution of 600 x 448 pixels. It has a built-in controller that communicates via the SPI interface. Seeed Studio 104990859
Retired
No product available!
A hub dedicated to smart home applications equipped with a Raspberry Pi CM4 module. It is a ready-to-use and fully supported Home Assistant device that has over 2,500 built-in integrations and supports hundreds of thousands of devices and services, which makes it help you control various aspects of your home such as lights, thermostats, TVs, music. Seeed Studio 113060066
Retired
No product available!
Flexible, black and white e-Paper display with a diagonal of 1.02" and a resolution of 128x80 pixels. It communicates via the SPI interface and ensures high contrast and low power consumption. Seeed Studio 104990842
Retired
No product available!
A set with a Doppler radar module and an XIAO ESP32C3 board designed for precise detection of human presence. It allows you to connect additional Grove sensors (analog or with an I2C interface) and expand the functionality. Seeed Studio 110061541
Retired
No product available!
Module with a 1.5" color IPS LCD display and a resolution of 240x280 pixels. It has rounded corners and uses the NV303B controller (SPI interface). Waveshare 1.5inch LCD Module
Retired
No product available!
A tape enabling the connection of a camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Waveshare Pi5-Camera-Cable-200mm
Retired
No product available!
A tape enabling the connection of a camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Waveshare Pi5-Camera-Cable-300mm
Retired
No product available!
A tape enabling the connection of a camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Waveshare Pi5-Camera-Cable-500mm
Retired
No product available!
5G Sub-6GHz module optimized for IoT/eMBB applications. It supports 5G non-standalone (NSA) and standalone (SA) modes. It has an integrated high-precision multi-band GNSS receiver with support for GPS, GLONASS, BDS and Galileo positioning systems. It is equipped with an M.2 B Key connector. Waveshare RM530N-GL
Retired
No product available!
A minisumo robot on a tracked chassis with Pololu 50:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3125