- Out-of-Stock
GY-GPS6MV2 - GPS module with U-blox NEO-6M
ID: 563067
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Description
The module allows you to add GPS support in a microcontroller system (eg Arduino ), and the built-in NEO-6M system gives great possibilities and ensures high precision of measurement. The module has a built-in cell supporting RTC clock settings.
properties
- GPS system: U-blox NEO-6M
- Transmission type: UART (lines Rx, Tx)
- Received band: L1 (1575.42MHz)
- Positioning efficiency: 3 m on average
- Drift: <0.02 m / s
- Reference system: WGS-84
- Maximum height: 18.000 m
- Maximum speed: 515 m / s
- Acceleration: <4g
- Tracking sensitivity: -161 dBm
- Sensitivity of acquisition: -148 dBm
- Average time of "cold start": 38 seconds
- The average "warm start" time is 35 s
- Hot start time: 1 sec
- Average recovery time: 0.1s
- Working temperature range: -40 ° C to + 80 ° C
- Power supply range: from +3.5 V to +5.5 V
- Bus voltage UART: 3.3 V
- The soldering points allow the antenna to be mounted on the PCB
- Built-in RTC backup battery
- Built-in u.FL connector for antenna
- Module dimensions (without antenna): 36 x 26 x 4 mm
- Dimensions of the antenna: 25 x 25 x 8 mm
Included
- The GY-GPS6MV2 module
- Antenna with u.FL connector
563067
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 11358
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 16795
Available
Available
GPS antenna, internal, SMA-A, 5m, straight, magnet
zł29.90
24h
Available quantity: 11
Available
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 75mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 25 x 25 x 4 mm
zł15.10
Delivery date unknown
No product available!
The adapter allows you to connect the antenna with the SMA 50 Ω female connector to the device with the uFL socket (also known as u.FL, IPEX, IPAX, IPX, MHF, AM). The cord has a length of 20cm.
zł8.39
24h
Available quantity: 5
Available
ZL5USB is a USB-UART converter module based on Silabs CP2102. The module has small sizes, microUSB connector and it can works with the 2.5...5.5V signals.
zł24.90
24h
Available quantity: 316
Available
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 110mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 8 x 8 x 7mm
zł14.90
Delivery date unknown
No product available!
Other products in the same category (16)
PCB with programmed system for 4-channel thermostat with alarm. AVT5589 A +
Retired
No product available!
AVT kit for self-assembly of a 4-channel thermostat with alarm. AVT5589 B
Retired
No product available!
Assembled 4-channel thermostat with alarm. AVT5589 C
Retired
No product available!
No product available!
No product available!
MYS-6ULX-IND is a small single board computer (SBC - Single Board Computer) designed specifically for use in Industry 4.0. It has a built-in NXP MCIMX6G2CVM05A processor based on the Cortex A7 core, which can operate at a maximum frequency of 696 MHz
Retired
No product available!
MYS-6ULX-IOT is a small single board computer (SBC) dedicated to Internet of Things projects. It has a built-in NXP MCIMX6Y2DVM05A processor based on the Cortex A7 core. It can work at a maximum frequency of 528 MHz. MYIR MYS-6ULX-IOT
Retired
No product available!
USB A 2.0 / USB C cable silicone, 1 m, black
Retired
No product available!
USB A 2.0 / USB C cable silicone, 1 m, white
Retired
No product available!
No product available!
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254
Retired
No product available!
This sensor shield utilizes the BME280 pressure/humidity/temperature sensor, the CCS811 air quality sensor and the APDS-9301 ambient light sensor - using each corresponding Arduino library. The shield has been equipped with two RJ11 connectors for wind and rain detection and measurement, as well as optional pins for external temperature readings and soil moisture sensor. DEV-14153
Retired
No product available!
SparkFun Inventor’s Kit is a great way to get started with programming and hardware interaction with the Arduino programming language. The kit includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don’t need any previous programming or electronics experience to use this kit. KIT-13970
Retired
No product available!
RoboClaw 2x60A Motor Controller (V6) is a two-channel DC motor driver, operating voltage: 6-34V, maximum continuous current: 60A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3289
Retired
No product available!
Gold-plated HDMI (M) - HDMI (M) cable with a length of 1.5 m, Ultra Slim, RoHS
Retired
No product available!
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs