- Out-of-Stock

The printed circuit board of the PIC16F84 development kit
A printed circuit board of the ZL1PIC set.
The ZL1PIC module allows you to conduct experiments with PIC16F8x microcontrollers. The ZL1PIC set consists of two printed boards: base (microcontroller) and LED display. On each board there are mounting areas on which additional peripheral modules can be made and it is easy to test their work. Universal mounting plates can be easily broken off, using appropriate notches to help. The plates are made in two-sided technology with metallization, on both sides are covered with a solder mask, and on the element side there is a print illustrating the arrangement of the elements.
There are several I / O components on the microcontroller board (4 LEDs and 4 micro switches, piezoelectric buzzer) that can be used in any way in your own application. Using the set facilitates the built-in supply voltage stabilizer with the Graetz bridge rectifier on the input, thanks to which it is not possible to damage the set by inverting the supply voltage (8 ... 12 VDC / 60 mA). All port lines: PORTA and RB4..RB7 lines of the PORTB port are connected to the 20-pin IDC connector, which is used to connect external peripheral circuits.
The second PCB can be assembled with a 3-digit multiplexed LED display. The operation of this display is shown in the book "PIC16F8x microcontrollers in practice". All programs presented in the book "PIC16F8x microcontrollers in practice" were tested based on the ZL1PIC set.
No product available!
HK 10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation (Flouro Yellow) (25823)
No product available!
No product available!
HDMI - mini HDMI cable, 1.8 m long, black. Compliant with HDMI v1.4 specification. Lanberg CA-HDMI-14CC-0018-BK
No product available!
HK Hobbyking KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer (39791)
No product available!
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
No product available!
No product available!
No product available!
Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of Jetson Nano with 2GB RAM, expansion module, WiFi card, camera, motors, housing and a set of mounting screws. JetBot AI Kit (M2 WiFi) 2GB
No product available!
RGB LED matrix display with a resolution of 64 x 64 (4096 LED). DFRobot DFR0499
No product available!
No product available!
No product available!
No product available!
Graphic LCD 160x128, 129x102mm, LED backlight (White), FSTN, character generator, negative voltage generator, T6963C controller
No product available!
No product available!
The printed circuit board of the PIC16F84 development kit