- Out-of-Stock
Gravity: UART A6 GSM & GPRS Module - GSM / GPRS module
ID: 566221
Gravity: UART A6 GSM & GPRS Module is a board with a GSM / GPRS module powered by 5V. It allows sending text messages, making voice calls and transmitting data. DFRobot TEL0113
Description
Gravity: UART A6 GSM & GPRS Module is a board from DFRobot company with a built-in module supporting GSM / GPRS transmission technology. Unlike other DROBOT IoT modules, this module does not use WiFi for communication, and GSM transmission, which allows the module to be used also in places remote from the WiFi network. Communication with the module takes place via a UART interface with a voltage of 2.8 V, which makes the module compatible with Arduino , Raspberry Pi or any microcontroller. The module is powered by 5V voltage through the Gravity connector and does not require additional external power supply.
Attention!
The module for operation requires a mini-SIM card placed in the slot in the bottom of the board. To use micro-SIM or nano-SIM cards, use an adapter.
GSM technology enables sending SMS messages, making voice calls or data transmission within GPRS with the speed of 85.6 Kbps (download) and 42.8 Kbps (sending). The module is configured using AT commands.
properties
- Based on the A6 GSM & GPRS chip
- Communication interface: UART (TTL)
- Frequencies GSM / GPRS: 850/900/1800/1900 MHz
- Sensitivity: <- 105 dBm
- GPRS Class 10
- Support for VoLTE
- Support for SMS
- Support for GPRS data transmission: download 85.6 Kbps, send 42.8 Kbps
- Support for AT commands
- Support for digital and analog audio as well as HR, FR, EFR, AMR voice coding
- Slot for mini-SIM cards
- Gravity connector
- 3.5 mm Jack connector
- Antenna connection (antenna included)
- Working temperature: -30 ~ 80 ?
- Power consumption in Standby mode: <3mA
- Power supply: 5 V
- Dimensions: 45 x 37 mm
- Weight: 34 g
Included
- Gravity Module: UART A6 GSM & GPRS Module
- Connecting cable Gravity (4Pin IIC / I2C / UART Sensor Cable)
- Goldpin XH2.54-4P pins connector
- GSM antenna
566221
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module with that lets you add location-tracking, voice, text, SMS and data to your project, in Arduino shield format for easy use. Adafruit 2636
zł326.70
Delivery date unknown
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.41
24h
Available quantity: 4
Available
Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
zł65.65
24h
Available quantity: 3
Available
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
Delivery date unknown
No product available!
Other products in the same category (16)
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
A module with a color and gesture sensor based on the APDS-9960 chip. It can detect simple hand gestures, RGB colors and measure ambient light. DFRobot SEN0187
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
No product available!
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed Android 4.x or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
3.2D soldering tip, flat screwdriver 5.5mm in diameter, for WEP 926 soldering station
Retired
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
Retired
No product available!
5V / 3.1A eXtreme power supply with microUSB plug for all Raspberry Pi computers (including Pi 3 model B and Pi 3 model B +)
Retired
No product available!
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 25mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 9 x 9 x 4mm
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
Kit: MAXimator, MAXimator Expander, ZL32PRG - USB Blaster PRO
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
MYD-JA5D44 Development Board is a complete educational platform. Its heart is the MYIR MYC-JA5D44 module, which was equipped with the Atmel SAMA5D44 processor based on Cortex-A5 cores. The processor can work at a maximum frequency of 600 MHz. Min. RS232, RS485 connectors, HDMI connector, 3.5 mm Jack Audio inputs, microSD memory card slot, 10/100 Mbps Ethernet slot and many more.
Retired
No product available!
Gravity: UART A6 GSM & GPRS Module is a board with a GSM / GPRS module powered by 5V. It allows sending text messages, making voice calls and transmitting data. DFRobot TEL0113