Pico Inky Pack - module with display e-Paper 2.9" 296x128 for Raspberry Pi Pico

KIT-13205

KAmodMIC_MEMS is a module with a microphone type SPV1840LR5H-B. Thanks to the built-in amplifier with 100-fold signal amplification, the voltage at the module output can be measured using, for example, an ADC converter

The CY8CKIT-049-42xx Prototyping Kit is a low cost prototyping platform for customers wishing to test and develop applications using the PSoC® 4 device family. CY8CKIT-049-42XX

DEV-13037

DEV-13045

The general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3108

The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3109

This version has a 56:1 metal gearbox with a 0.276"-long, 4 mm-diameter D-shaped output shaft. Key specs at 6 V: 250 RPM and 250 mA free-run, 45 oz-in (3.3 kg-cm) and 3.3 A stall. Pololu 1450

This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.

The UM7 orientation sensor from CH Robotics is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. Pololu - 2741

The A-Star 32U4 Mini SV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-down regulator that allows it to be powered efficiently from a 5 V to 36 V supply. Pololu 3104

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 6 A.

High performance full NFC compliant expansion board compatible with Raspberry Pi.  EXPLORE-NFC

SATA line for Banana Pi only. Connects a 2.5 inch Hard Disk to your Banana Pi Computer

Aluminum Heat Sink for the Banana Pi CPU/GPU chip

This is an aluminum heat-sink for the Banana Pi RAM Chips. Run cool RAM chips with this little add-on. Just one heat-sink is needed to cover both RAM chips, use the picture below as reference. Signs of RAM or CPU overheating are computer stops responding, frozen screen and power shutt down or cycling.