Audio amplifier TPA2030A 2x18W + 20W
ID: 1181566
5906623444489
zł48.60
Tax included
zł39.51 tax excl.
Class AB audio amplifier with three output channels. It can be powered with AC voltage from 8 to 18 V and has two outputs with a power of 18 W (left and right) and one with a power of 20 W (bass)
Description
Class AB audio amplifier based on the TPA2030A chip. It has two channels with a power of 18 W (left and right) and one 20 W (bass) and can work with speakers with an impedance from 4 to 16 Ω (left and work channel). The module is powered with AC voltage in the range from 8 to 18 V. The user has 3 potentiometers to adjust the volume level, high and low tones. A heat sink is used to cool the TDA2030A system, and the division into modules makes it easier to install the boards in the housing. The amplifier's output signals to the loudspeakers and the subwoofer are led out on the ARK connectors. Amplifier line input is available on RCA connector, 3.5mm stereo jack or XH2.54 pin connector.
Features
- Power supply: ARK clamp connector
- Audio input: ARK clamp connector
- Output: RCA, Jack 3.5mm, XH2.54
- Potentiometer for volume, bass and treble control
- Signal to noise ratio:> 82db
- Frequency response: 20Hz-20kHz
- Speaker impedance: left and right channels: 4-16 ohms
- Voltage range: AC 8 to 18V
- Power: up to 18 W (left channel and right channel), 20W (bass channel)
Kit contains
- Amplifier module
- Control module
- Connecting cables
1181566
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.42
24h
Available quantity: 5
Available
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
zł84.32
Delivery date unknown
No product available!
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 18 V and has two outputs with a power of 10 W (left and right) and one with a power of 20 W (bass)
zł43.21
24h
Available quantity: 4
Available
Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 5 to 24 V and has two outputs with a power of 100 W. ZK-1002L
zł59.30
Delivery date unknown
No product available!
Other products in the same category (16)
Digital audio amplifier dedicated to woofers. It has two channels with a power of 50 W each and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 25 V
zł42.91
24h
Available quantity: 4
Available
Module dedicated to the audio preamplifier with DIP8 socket for NE5532, OPA2134, OPA2604 or AD826 chips
zł9.03
4 weeks
No product available!
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
zł84.32
4 weeks
No product available!
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
zł53.90
24h
Available quantity: 6
Available
Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553
zł131.14
24h
Available quantity: 1
Available
Class A audio amplifier with one channel, 25 W. Built on the popular design of J. Hood from 1969. The set includes 2 pieces
zł163.57
4 weeks
No product available!
Module with the WM8960 audio codec, which allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Waveshare WM8960 Audio HAT
zł88.09
4 weeks
No product available!
The TPA3116D2 amplifier module is a digital class D amplifier, offering 2x50W of power for stereo channels and 100W for the subwoofer, powered by 12V-24V. Thanks to the built-in NE5532 low-pass filter, it provides clean bass sound, and three potentiometers allow you to adjust the volume and cutoff frequency.
zł64.33
4 weeks
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 16 Ω. It is powered with the voltage ranging from 9 to 24 V.
zł156.58
4 weeks
No product available!
Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 9 to 24 V and has two outputs with a power of 50 W. Assembly kit. ZK-502C
zł73.76
4 weeks
No product available!
Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
zł26.32
24h
Available quantity: 1
Available
Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954
zł26.76
24h
Available quantity: 4
Available
An audio module with a DAC converter and a stereo amplifier designed to work with the Raspberry Pi. Adafruit 3346
zł67.07
24h
Available quantity: 1
Available
Microphone preamplifier based on the AD828 chip. Powered with DC voltage from 9 V to 24 V or AC in the range from 8 V to 16 V
zł13.07
4 weeks
No product available!
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 18 V and has two outputs with a power of 10 W (left and right) and one with a power of 20 W (bass)
zł43.21
24h
Available quantity: 4
Available
LM386 mono digital audio amplifier module. It has a voltage gain of 200 and is powered from 5V to 12V
zł5.58
24h
Available quantity: 29
Available
Class AB audio amplifier with three output channels. It can be powered with AC voltage from 8 to 18 V and has two outputs with a power of 18 W (left and right) and one with a power of 20 W (bass)