

Class A power amplifier with two 45 W channels. It is based on TIP41 transistors, based on the popular design by J. Hood from 1969. The components and workmanship ensure good sound quality and stable operation. There are four potentiometers on the board to adjust parameters (including static current) necessary for device calibration. The amplifier is powered with the voltage from 12 to 28 V (the manufacturer recommends powering both channels from one source). Power supply as well as input and output signals are connected to screw terminals.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
No product available!
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 18 V and has two outputs with a power of 10 W (left and right) and one with a power of 20 W (bass)
Class D PAM8410 class D stereo digital audio amplifier. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W per channel
Class A power amplifier with two channels, 20 W. Built on the popular J. Hood design from 1969
No product available!
PAM8610 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 10 W
Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553
Audio amplifier with three output channels. It can be powered with the voltage from 5 to 26 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication. XY-S100L
Module with LM386 audio amplifier and loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 107020001
Class D LTK5128 mono digital audio amplifier module. The system allows you to connect one loudspeaker with an impedance from 4 to 8 Ω and a power of 5 W
Audio module with DAC and mono amplifier designed to work with TinyPICO and TinyS2. Pimoroni SHIELD-AUDIO-I2S
No product available!
Audio module with 8 Ohm loudspeaker and 8002B amplifier. It can be used as a buzzer and also play high-quality sound. The volume is controlled by a potentiometer. DFRobot FIT0449
Class D digital audio amplifier. It has two channels with a power of 160 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 15 to 36 V.
Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357
Class D digital audio amplifier. It has two channels with a power of 450 W and can be used with 8 Ω speakers. Powered by AC voltage 2x30V
No product available!
The LM4950 audio power amplifier module with a power of 3 W per channel, powered by 10-15 VDC, equipped with a 3.5 mm Jack socket for audio input and screw connections for loudspeaker outputs, is equipped with thermal and short-circuit protection. It provides good sound quality with low energy consumption, making it ideal for small audio systems
Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
Module dedicated to the audio preamplifier with DIP8 socket for NE5532, OPA2134, OPA2604 or AD826 chips
No product available!
Module with two operational amplifiers OPA627
Class A power amplifier with two channels, 45 W. Built on the popular J. Hood design from 1969