modXH-M189 Audio amplifier module TPA3116D2 2x50W DC 24V

Class D stereo sound amplifier based on the Texas Instruments TPA2016D2 circuit. It can work with 4 Ω speakers with power up to 2.8 W or 8 Ω with power up to 1.7 W in stereo mode. SparkFun DEV-20690

Zeenko ZK07-BM is a low-noise, wideband amplifier with very high gain, powered by a battery and intended for operation in the 30 MHz – 6 GHz band. Ideal for compensating losses in long antenna lines, it provides up to 43 dB of gain and very good noise performance. Recommended for installation as close to the antenna as possible in receiving and measurement paths.

Class D digital audio amplifier. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 11 to 26 V

The TDA7498 audio amplifier module offers 2x100W power, enabling connection via Bluetooth, TF card and AUX. Powered by 12-24V DC, it is compatible with speakers with a resistance of 4 to 8Ω and is characterized by compact dimensions.

The board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Adafruit 1752

Module of a stereo 24-bit audio converter with I2S interface (TS4657).

Class A power amplifier with one channel (mono) with the power of 10 W. Built on the popular design of J. Hood from 1969

An audio module with a DAC converter and a stereo amplifier designed to work with the Raspberry Pi. Adafruit 3346

Module with two operational amplifiers OPA627

Zeenko ZK09-UM is a compact low-noise RF amplifier operating in the 100 kHz to 10 GHz band, powered via USB-C and equipped with on-chip bias technology. It provides high linearity, stable gain, and a wide operating bandwidth, serving as an alternative to popular microwave amplifiers in laboratory and measurement applications.

The LM4950 audio power amplifier module with a power of 3 W per channel, powered by 10-15 VDC, equipped with a 3.5 mm Jack socket for audio input and screw connections for loudspeaker outputs, is equipped with thermal and short-circuit protection. It provides good sound quality with low energy consumption, making it ideal for small audio systems

Class D PAM8403 stereo digital audio amplifier module. The system allows you to connect two speakers from 4 to 8 Ω with a power of 3 W per channel. modPAM8403

A class-D audio amplifier designed for the Pimoroni Yukon platform, offering up to 25W of mono output. The module allows for connection to speakers with an impedance of 4Ω or greater and delivers clean, dynamic sound thanks to the TAS2780 chip. Equipped with a temperature sensor and screw terminals, it\'s ready to use, no soldering required. Pimoroni PIM689

Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770

Audio module with DAC converter and mono amplifier, designed to work with the Raspberry Pi. Pimoroni PIM541

The TPA3116DA 150W XH-M544 audio amplifier module is a compact device with a wide input voltage range (12-26V) and output power up to 150W (100W recommended), ensuring clear sound with a signal-to-noise ratio of 100dB. The small size (77 x 73 x 19mm) makes it an ideal choice for a variety of audio projects.