

Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. The input signal is connected through the Jack 3.5 mm socket, and the speakers through the screw connections. Two potentiometers allow you to smoothly adjust the gain and cut-off frequency in the range from 20 Hz to 180 Hz. Thanks to the filter used, only the low tones (bass) are amplified, which is why the module is dedicated to bass speakers (subwoofer). It is powered with the voltage in the range from 12 V to 24 V. It works well in home and car audio systems.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
3.5 Jack plug, stereo, with a plastic cover.
3.5mm jack plug adapter for 3-pin terminal block connector. It allows you to connect two audio channels (stereo). JACK3.5S-TB-M
Audio cable with 3.5 mm 3-pin minijack plugs, 2 m length. LANBERG CA-MJMJ-10CC-0020-BK
The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
The Lanberg audio cable with a length of 500 cm enables stereo sound transmission via 3.5 mm minijack and 2x RCA (Chinch) connectors, ensuring compatibility with a wide range of devices such as computers, smartphones, TVs, and multimedia players. With high-quality craftsmanship, nickel-plated contacts, and a plastic braid, it guarantees excellent signal conductivity, minimal interference, and reliability. Its solid construction makes it suitable even for more demanding users. CA-MJRC-10CC-0050-BK
The PAM8403 class D stereo digital audio amplifier module is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3 W
No product available!
Pmod I2S2 is a module with 24-bit A / C and D / C audio converters derived from standard 3,5 mm Jack connectors. Thanks to them, it is possible to send and receive stereo audio signals using the I2S protocol. Digilent 410-379
The TDA7498 audio amplifier module offers 2x100W power, enabling connection via Bluetooth, TF card and AUX. Powered by 12-24V DC, it is compatible with speakers with a resistance of 4 to 8Ω and is characterized by compact dimensions.
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
No product available!
Module with the WM8960 audio codec, which allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Waveshare WM8960 Audio HAT
TPA3110 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 300 W and can work with 4 Ω speakers. Powered by alternating voltage 230 V
Sound terminal expansion board based on STA350BW for STM32 Nucleo
No product available!
SJ2038 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3.5 W
Module with two operational amplifiers OPA627
A set with an audio amplifier with a power of 350 W dedicated to the bass column (subwoofer)
No product available!
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21772
No product available!
Microphone preamplifier based on the NE5532 chip. Powered with DC voltage from 9 V to 24 V or AC in the range from 8 V to 16 V
Class A power amplifier with two channels, 20 W. Built on the popular J. Hood design from 1969
No product available!
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)