Audio amplifier module TPA3116 2x50W+100W with Bluetooth 5.0
ID: 1186094
5906623452491
zł114.78
Tax included
zł93.32 tax excl.
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
Description
Digital audio amplifier module based on the TPA3116 chip. It has two channels of 50 W (left and right) and one 100 W (bass) and can work with speakers with an impedance of 4 to 8 Ω (left and working channel) and 2 to 8 Ω (bass). The module is powered with a voltage in the range of 12 to 24 V. There are 5 potentiometers on the board to adjust the volume, treble and bass. The audio input can be connected via a 3.5 mm Jack connector or a 3-pin AUDIO IN connector, while the outputs are led out on screw connectors. It is equipped with the Bluetooth 5.0 module. It will work as an element of a home audio system.
Features
- Power supply: DC socket or terminal block
- Audio input: 3.5 mm jack or 3-pin audio connector
- Bluetooth 5.0 module
- Potentiometer to adjust the bass volume
- Potentiometer to adjust the volume of the left and right channels
- Potentiometer to adjust the treble
- Switch/potentiometer to adjust the total volume
- Audio input sensitivity: 600-800mV
- Frequency response: 20Hz-20kHz
- Speaker impedance: left and right channel: 4-8 Ω, bass channel: 2-8 Ω
- Operating voltage range: DC 12 to 24V
- Power: up to 50W (left channel and right channel), 100W (bass channel)
- Dimensions: 101x100x30mm
1186094
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.67
24h
Available quantity: 18
Available
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
zł117.56
24h
Available quantity: 1
Available
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
zł84.32
Delivery date unknown
No product available!
MP3 panel with a HiFi amplifier for installation in an audio device. It allows you to play files from USB memory, SD card, via AUX and Bluetooth. It has a built-in FM receiver
zł56.89
Delivery date unknown
No product available!
Other products in the same category (16)
Stereo audio amplifier based on the TDA7498 chip. It can be powered with the voltage from 20 to 36 V and has two 100 W outputs
zł73.74
4 weeks
No product available!
Stereo audio amplifier with Bluetooth communication. It can be powered with the voltage from 8 to 26 V and has two outputs with a power of 50 W. The set includes a remote control
zł58.49
4 weeks
No product available!
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
zł128.47
24h
Available quantity: 2
Available
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
zł134.55
24h
Available quantity: 2
Available
Module with an AB class amplifier based on the Boomer® LM4853 system. It can work in two modes: mono (power 1.5 W, load 4 Ω) or stereo (power 300 mW, load 8 Ω). It has a potentiometer for power control and gain control for the left and right channel. SparkFun DEV-14475
zł95.58
24h
Available quantity: 3
Available
Single-channel audio amplifier up to 100 W.
zł65.33
24h
Available quantity: 3
Available
Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791
zł28.62
24h
Available quantity: 3
Available
100 W audio signal converter that reduces the speaker signal from the player to the level of RCA inputs. It allows you to connect the radio to an external power amplifier
zł45.87
24h
Available quantity: 2
Available
Module containing TSH82 operational amplifier from STMicroelectronics. The system has two built-in amplifiers and each of them is available separately on the pins of the board as inverting amplifiers. Sparkfun BOB-14874
zł44.64
3 weeks
No product available!
Class D digital audio amplifier. It has two channels with a power of 450 W and can be used with 8 Ω speakers. Powered by AC voltage 2x30V
zł336.80
4 weeks
No product available!
Audio amplifier with three output channels. It can be powered with the voltage from 5 to 26 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication. XY-S100L
zł111.19
24h
Available quantity: 7
Available
Sound terminal expansion board based on STA350BW for STM32 Nucleo
zł194.73
1 weeks
No product available!
The XH-A232 audio amplifier module is based on the TPA3110 chip, offering 30W output power for each of the two channels in class D. Its compact dimensions (53 x 45 x 14mm) and low weight (19.5g) make it ideal for DIY audio projects with high quality sound.
zł9.53
4 weeks
No product available!
80 W audio signal converter that reduces the speaker signal from the player to the level of RCA inputs. It allows you to connect to an external power amplifier. TSK TD-22
zł29.79
24h
Available quantity: 2
Available
Stereo audio preamplifier based on two uPC4570C operational amplifiers. It allows you to control the bass, treble and volume level
zł210.17
24h
Available quantity: 1
Available
A sound card in the form of a small device with a USB plug, designed to work with the Raspberry Pi and NVIDIA Jetson Nano minicomputer. Waveshare USB TO AUDIO
zł32.95
24h
Available quantity: 3
Available
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication