Class A 10W power amplifier (TIP41C) - 2 pcs (for self-assembly)
ID: 588119
5906623448661
zł56.09
Tax included
zł45.60 tax excl.
Class A power amplifier with one channel, 10 W. Built on the popular design of J. Hood from 1969. The set includes 2 pieces for self-assembly
Description
A class A power amplifier with a single channel, 10 W. It was built on the basis of TIP41C transistors, based on the popular design by J. Hood from 1969. The components and workmanship ensure good sound quality and stable operation. There are two potentiometers on the board to adjust parameters (including static current) necessary for device calibration. The amplifier is powered with the voltage from 12 to 24 V, and the input and output signals are connected to screw connectors and contacts of flat connectors.
Features
- Class A amplifier
- Number of channels: 1
- Supply voltage: 12 to 24 V
- Power: 10 W
- Adjustment of transistor operating points
- Screw connectors and contacts for flat connectors
- Dimensions: 50 x 50 mm
Kit contains
- 2 x PCB board
- 2 x housing
- 4 x TIP41C transistor
- 2 x set of capacitors and resistors
- 2 x LED
- 2 x set of connectors
- 4 x potentiometer
588119
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Class A power amplifier with two channels, 45 W. Built on the popular J. Hood design from 1969
zł115.94
Delivery date unknown
No product available!
Class A power amplifier with one channel, 10 W. Built on the popular design of J. Hood from 1969. The set includes 2 pieces
zł66.63
Delivery date unknown
No product available!
Class A audio amplifier with one channel, 25 W. Built on the popular design of J. Hood from 1969. The set includes 2 pieces
zł163.57
Delivery date unknown
No product available!
Other products in the same category (16)
Module with the WM8960 audio codec, which allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Waveshare WM8960 Audio HAT
zł88.09
4 weeks
No product available!
Single-channel audio amplifier up to 100 W.
zł65.33
24h
Available quantity: 2
Available
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
zł135.09
4 weeks
No product available!
2-channel stereo audio mixer in a metal housing. It has four outputs, on which the summed signal from 2 inputs is available. It is powered with the voltage from 5 to 19 V
zł94.89
4 weeks
No product available!
Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791
zł28.68
24h
Available quantity: 4
Available
Zeenko ZK04-UM is a compact low-noise RF amplifier operating in the 100 kHz – 4 GHz range, powered via USB-C, featuring high linearity and low noise levels. Ideal for amplifying antenna signals or as a preamplifier for spectrum analyzers such as the tinySA ULTRA, especially above 3.5 GHz.
zł55.93
6 weeks
No product available!
Zeenko ZK06-UM is a precise, wideband RF amplifier for the 10 MHz – 6 GHz range, designed for high-sensitivity measurements with low interference. Powered via USB-C and optimized for use with devices such as the tinySA ULTRA, it offers high linearity and a low noise figure across the entire supported band.
zł55.69
24h
Available quantity: 10
Available
The module with a digital stereo audio amplifier is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance of 6 Ω or 8 Ω with a power of 6 W per channel
zł38.29
24h
Available quantity: 3
Available
No product available!
Zeenko ZK09-BM is a low-noise, ultra-wideband RF amplifier with an operating range up to 10 GHz, powered by a built-in battery. Thanks to its good linearity and noise performance, it is used in measurements, receiver paths and communication systems. Compact and mobile, it will work well both in laboratories and in the field.
zł103.97
6 weeks
No product available!
LM386 audio amplifier module in a set with a loudspeaker. The board is equipped with a Grove connector and is controlled by a PWM signal. Seeed Studio 101020853
zł57.54
24h
Available quantity: 2
Available
Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357
zł11.89
24h
Available quantity: 15
Available
PAM8610 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 10 W
zł17.26
4 weeks
No product available!
Microphone preamplifier based on the AD828 chip. Powered with DC voltage from 9 V to 24 V or AC in the range from 8 V to 16 V
zł13.07
4 weeks
No product available!
LM386 audio amplifier module. It is supplied with the voltage ranging from 4 to 12 V. The set includes an 8 Ω, 0.5 W loudspeaker. DFRobot DFR0064
zł61.97
24h
Available quantity: 1
Available
TEA2025B class D stereo digital audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 16 Ω and a power of 3 W each
zł14.91
24h
Available quantity: 7
Available
Class A power amplifier with one channel, 10 W. Built on the popular design of J. Hood from 1969. The set includes 2 pieces for self-assembly