List of products by brand Inny

BMS module for three Li-Ion cells with a voltage of 11.1 V. It has the function of charging with a balancer, discharging and over-discharge protection. The cells can be charged with a continuous current of up to 12 A

Conductive ITO coated glass. It has dimensions of 100x100 mm, a thickness of 1.1 mm and a resistance of 10 Ω/inch2

Self-priming diaphragm pump with medium flow capacity. It is powered with the voltage of 12 V

The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 8 A

The protection system for four Li-Ion cells with a voltage of 14.8 V. The module has the function of charging the cells, discharging and protecting against excessive discharge. The cells can be discharged with a continuous current of up to 18 A

Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell

Conductive ITO coated glass. It has dimensions of 355.6x406.4 mm, a thickness of 1.1 mm and a resistance of 10 Ω/inch2

BMS module for six Li-Ion cells with a voltage of 22.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 14 A

A set containing 560 pcs of colored connecting cables of various lengths, intended for connecting fields in contact plates. BBJ-560

Permanent cylindrical neodymium magnet with a diameter of 30 mm, height of 5 mm with hole 6,5mm.

A set containing 840 pcs of colored connecting cables of various lengths, intended for connecting fields in contact plates. BBJ-840

Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)

Brushless DC motor (BLDC) driver with speed control by potentiometer. It can operate motors powered with a voltage from 7 to 12 V with a current consumption of up to 1.2 A

The DRP2 is a robust DIN rail mount for Raspberry Pi 4B, 3B+, 3B and 2B. It provides a secure and stable mount in control cabinets and other industrial installations, with full access to all ports and connectors.

Step-Up/Step-Down converter with an output voltage of 5 V, an input voltage from 3 to 15 V and a maximum current of up to 600 mA

Module with acceleration and rotational speed sensor based on the MPU6050 system. It communicates via the I2C or UART interface

A small adapter equipped with a USB type A socket, USB type A plug, microUSB socket and a USB type C socket

Kynar type cable with a diameter of 0.25 mm (30 AWG) and a length of 180 m. Used for connections in electronic devices, e.g. on PCB

Kynar type cable with a diameter of 0.25 mm (30 AWG) and a length of 180 m. Used for connections in electronic devices, e.g. on PCB

Kynar type cable with a diameter of 0.25 mm (30 AWG) and a length of 180 m. Used for connections in electronic devices, e.g. on PCB