- Obecnie brak na stanie

MYIR Z-turn Board - ARM Cortex-A9 Single Board Computer with Xilinx Zynq-7010 (XC7Z010-1CLG400C)
Overview
The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.
The Z-turn Board takes full features of the Zynq-7010 / 7020 SoC, it has 1GB DDR3 SDRAM and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.
The Z-turn Board is capable of running Linux operating system. MYIR has provided Linux 3.15.0 SDK, the kernel and many drivers are in source code. The board is delivered with complete accessory kit including two USB cables, one Ethernet cable, one HDMI cable, one 4GB TF card and one 5V power adapter and product CD-ROM which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional USB 3G, WiFi and camera modules for the Z-turn Board.
The Z-turn Board is an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. It can also be used as a System-on-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and military, etc.
Features
SoC | Xilinx XC7Z010-1CLG400C (Zynq-7010) - 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz) - Integrated Artix-7 class FPGA subsystem with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010) with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020) - NEON™ & Single / Double Precision Floating Point for each processor - Supports a Variety of Static and Dynamic Memory Interfaces |
Memory | 1GB DDR3 SDRAM (2 x 512MB, 32-bit) |
Storage | 16MB QSPI Flash TF card interface |
Communications | 1 x 10/100/1000M Ethernet 1 x CAN 1 x Mini USB2.0 OTG 1 x USB-UART debug interface |
Display | 1 x HDMI (supports 1080p resolution) |
User I/O | Brought out via two 1.27mm pitch 80-pin SMT female connectors 90/106 user I/O (7010/7020) Configurable as up to 39 LVDS pairs I/O |
Dimensions | 63mm x 102mm x 1.6mm (8-layer PCB design) |
Power supply | USB power supply or DC 5V/2A |
Others | Onboard three-axis acceleration sensor and temperature sensor 1 x 2.54mm pitch 14-pin JTAG interface 2 x Buttons (1x Reset, 1 x User) 4-channel toggle switch 5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED) 1 x Buzzer |
OS support | Linux 3.15.0 |
Target Applications | Evaluation and Prototyping for Zynq-7000 AP SoC Industrial Automation Test & measurement Medical Equipment Intelligent Video Surveillance Aerospace and military |
Hardware Features
The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.
The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix®-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex®-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.
Z-7010 | Z-7015 | Z-7020 | Z-7030 | Z-7035 | Z-7045 | Z-7100 | |
Processor Core | Dual ARM® Cortex™-A9 MPCore™ with CoreSight™ | ||||||
Processor Extensions | NEON™ & Single / Double Precision Floating Point for each processor | ||||||
L1 Cache | 32 KB Instruction, 32 KB Data per processor | ||||||
L2 Cache | 512 KB | ||||||
On-Chip Memory | 256 KB | ||||||
Memory Interfaces | DDR3, DDR3L, DDR2, LPDDR2, 2x Quad-SPI, NAND, NOR | ||||||
Peripherals | 2x USB 2.0 (OTG), 2x Tri-mode Gigabit Ethernet, 2x SD/SDIO | ||||||
Logic Cells | 28K Logic Cells | 74K Logic Cells | 85K Logic Cells | 125K Logic Cells | 275K Logic Cells | 350K Logic Cells | 444K Logic Cells |
BlockRAM (Mb) | 240 KB | 380 KB | 560 KB | 1,060 KB | 2,000 KB | 2,180 KB | 3,020 KB |
DSP Slices | 80 | 160 | 220 | 400 | 900 | 900 | 2,020 |
Transceiver Count | 4 (6.25 Gb/s) | up to 4 (12.5 Gb/s) | up to 16 (12.5 Gb/s) | up to 16 (12.5 Gb/s) | up to 16 (10.3125 Gb/s |
Zynq-7000 Devices
Z-turn Board Function Block Diagram
Z-turn Board Dimension Chart
Software Features
em | Features | Description |
Cross compiler | gcc 4.6.1 | gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50) |
Boot program |
BOOT.BIN |
First boot program including FSBL, bitstream and u-boot |
Linux Kernel |
Linux 3.15.0 |
Customized kernel for MYS-XC7Z010/020 |
Drivers |
USB OTG |
USB OTG driver |
Ethernet |
Gigabit Ethernet driver |
|
MMC/SD/TF |
MMC/SD/TF card driver |
|
CAN |
CAN driver |
|
LCD Controller |
XYLON LCD driver |
|
HDMI |
HDMI driver |
|
Button |
Button driver |
|
UART |
UART driver |
|
LED |
LED driver |
|
GPIO |
GPIO driver |
|
Buzzer |
Buzzer driver |
|
G-Sensor |
Three-axis acceleration sensor driver |
|
Tempreture Sensor |
Temperature sensor driver |
|
File System |
Ramdisk |
Ramdisk system image |
Ubuntu Desktop 12.04 |
Tar file |
Packing List
Downloads
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
MY-WF003U USB WiFi Module
Brak towaru
Brak towaru
CENTRALKA STERUJĄCA NANOX SYSTEMU DCC - PŁYTKA DRUKOWANA I ZAPROGRAMOWANY UKŁAD
Brak towaru
Brak towaru
Tablica informacyjno reklamowa z czerwonymi diodami led - zestaw do samodzielnego montażu
Brak towaru
Brak towaru
Moduł z 12-kanałowym, pojemnościowym czujnikiem dotykowym MPR121 w zestawie z 4 sondami dotyku. Płytka została wyposażona w złącze Grove i komunikuje się przez interfejs I2C. Seeed Studio 101020047
Brak towaru
Sejf UGears to kreatywna zabawka i model mechaniczny z działającym zamkiem szyfrowym, oferująca wyjątkowe doświadczenie konstrukcyjne oraz intelektualną rozrywkę w odkrywaniu tajemnic bezpiecznego skrywania przedmiotów wartościowych. UGears 70011
Brak towaru
Brak towaru
Brak towaru
Wyświetlacz LCD 1x16, 80x36mm, FSTN NEGATIVE, LED backlight (blue), enhanced temperature range, RoHS
Brak towaru
Brak towaru
Orange Pi R1 to minikomputer z procesorem Allwinner H2+ opartym o rdzeń cortex-A7. Komputer jest wyposażony w 256 MB DDR3 RAM (współdzielone z GPU), Ethernet 10/100, 26 GPIO i złącze na kartę microSD. Posiada również oddzielny układ graficzny GPU - Mali400MP2. Współpracuje z systemami Android 4.4, Lubuntu, Debian, Armbian
Brak towaru
Brak towaru
Brak towaru
Marble Run Wciągnik Spiralny to nie tylko genialna zabawka, ale także obiekt, który może ozdobić każde wnętrze, będąc zarówno elegancką dekoracją, jak i fascynującym mechanizmem. To prezent, który z pewnością wywoła uśmiech na twarzy każdego, kto ceni sobie inżynierski kunszt i przyjemność z samodzielnego montażu. UGears 70177
Brak towaru
ARM Cortex-A9 Single Board Computer MYS-7Z010-C-S