Step-Down DC-DC converter module based on the D24V150F9 chip. Input voltage 11 ... 40V, output voltage 9V (max 15A). Pololu 2884

ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040

DC-DC Step-Up/Step-Down Converter Module. It has an input voltage of 1.4 to 16 V, an output voltage of 5 V and a maximum output current of 1 A to 1.5 A. Pololu 4965

Miniature, analog servomechanism with dimensions 20.0mm × 8.3mm × 17.3mm and weight 4.4g, power supply 4.8 ... 6V, maximum torque 0.6kg / cm (with 6V power supply). Pololu 3420

The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383

Motor with 20 mm diameter and 44 mm length, 156:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 91 RPM speed and 7.9 kg*cm maximum torque. Pololu 3718

Motor with 20 mm diameter and 43 mm length, 63:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 230 RPM speed and 4 kg*cm maximum torque. Pololu 3714

Motor with 20 mm diameter and 46 mm length, 488:1 metal gear, 12 V operating voltage, 0.08 A to 1.6 A power consumption, 28 RPM speed and 25 kg*cm maximum torque. Pololu 3497

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 Voperating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.

A module that provides a regulated, galvanically isolated power supply. It allows easy changing of the output voltage from 5 V to 3.3 V using the voltage selection pin (VSEL). Galvanic isolation between input and output effectively prevents problems related to ground loops and ground currents, ensuring stability and protection of the system. Pololu 5384

Module with ToF sensor VL53L7CX with an output in the form of a matrix of 64 pixels (8x8) and a range of up to 3.5 m. It communicates via the I2C interface. Pololu 3418

Motor with 20 mm diameter and 41 mm length, 25:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 570 RPM speed and 1.6 kg*cm maximum torque. Pololu 3462

Kit for tracks drive construction. It consists of silicone tracks and plastic gears and a set of screws. Pololu 3031

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2267

This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket. Pololu 2266

Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3763

A stepper motor driver for precise control of bipolar motors, offering six microstepping modes (from full to 1/32). It operates within a voltage range of 8.2V to 44V and delivers up to 1.5A per phase without cooling or up to 2.2A with a heatsink/fan, ensuring smooth and stable operation even at high speeds. Compatible with the popular A4988 and DRV8825 drivers, with an integrated regulator and overheating, overload, and short circuit protection, the TB67S581FNG is a reliable and versatile solution for applications requiring precise motion control. Pololu 2988

This set of two quadrature encoders for 20D extended-shaft motors provides precise rotational speed monitoring with 20 pulses per motor revolution. The devices utilize magnetic disc and Hall-effect sensors operating from 2.7-18V, and the digital outputs can be connected directly to a microcontroller. The encoders mount directly to the back of the motor, and the compact design and 6-pin JST PH connectors facilitate integration into robotic projects and control systems. Pololu 5661

DC-DC Step-Down converter module. It has an input voltage from 3.3 to 45 V, an output voltage of 3.3 V and a maximum output current of up to 3.7 A. Pololu 4891

DC-DC Step-Down converter module. It has an input voltage from 5 to 45 V, an output voltage of 5 V and a maximum output current of up to 3.4 A. Pololu 4892