DC-DC inverter module Step-Down 11 ... 40V - 9V D24V150F9
ID: 563137
5906623478279
zł485.70
Tax included
zł394.88 tax excl.
Step-Down DC-DC converter module based on the D24V150F9 chip. Input voltage 11 ... 40V, output voltage 9V (max 15A). Pololu 2884
Description
Step-Down DC / DC converter that reduces the input voltage to 9 V. The maximum current capacity of the inverter module is 15 A, it is the maximum continuous current that can be taken from the inverter. The efficiency of the converter ranges from 80 to 95%, which makes it a much better solution than linear voltage stabilizers. The inverter has reverse voltage protection, protection against short-circuiting output, soft start system and temperature protection.
The inverter manufacturer has derived two additional signals, "enable", by means of which the inverter can be switched on or off and the "power-good" output, the state of which changes when the inverter is unable to maintain a stable voltage. The typical current consumption of the inverter is about 100 mA, while in the low-power mode the inverter takes about 5 ... 10 uA for each volt of the input voltage.
properties
- Input voltage: 11 ... 40 V
- Output voltage: 9 V
- The maximum continuous current consumed: 15 A
- High efficiency: 80 ... 95%
- Built-in security:
- against backward tension
- before shorting the output
- soft start system
- temperature protection
- The current consumed by the inverter with no load: approx. 100 mA
- The current consumed by the unloaded converter in low power mode: 5 ... 10 uA for each volt of the input voltage
- The "power-good" signal informing about the state of the output voltage
- 4 mounting holes
- Dimensions: 43.2 mm x 31.8 mm x 11 mm
- Weight: 19 g (without soldered connectors)
563137
Data sheet
- Output voltage
- 9 V
- Output current
- 15 A
- Converter type
- Step-down
- Supply voltage min
- 11 V
- Supply voltages max
- 40 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Step-Down DC-DC converter module based on the D24V150F9 chip. Input voltage 11 ... 40V, output voltage 9V (max 15A). Pololu 2884
zł485.70
24h
Available quantity: 2
Available
Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885
zł470.35
24h
Available quantity: 2
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a lower, user-adjustable voltage set by an on-board trimmer potentiometer. It has an output voltage range of 2.5 V to 7.5 V and a maximum output current of 600 mA.
zł35.84
Delivery date unknown
No product available!
Other products in the same category (16)
The 4-channel Step-Down Converter module converts voltages in the range of 13.5-30V to 3.3V, 5V, 12V or regulated 2-28V, with a maximum current of 3A per channel and a total power of 50W. It includes protections and shutdown functions and can operate in temperatures from -40°C to +85°C.
zł55.20
24h
Available quantity: 2
Available
Step-Down Converter Module allows you to adjust the voltage from 5-36V to 1.3-32V, supporting a maximum of 8A current (5A recommended) and 200W power. It also features voltmeter, ammeter and short circuit protection, offering 94% efficiency and 180KHz switching frequency. XH-M403
zł60.93
24h
Available quantity: 3
Available
The HW-212 enables precise voltage and current regulation across a wide range of parameters, while maintaining high efficiency and clear operational control via an LCD display. The module is ideal for test benches, electronics power supply projects, battery charging, and high-power LED control
zł57.67
24h
Available quantity: 4
Available
The Step-Down Converter Module with Voltmeter and Ammeter offers a wide input and output voltage range, with a maximum output current of 12A and a power of 160W. It comes with advanced monitoring and protection features and its conversion efficiency is around 96%.
zł76.15
24h
Available quantity: 2
Available
The AC-DC converter module converts the voltage in the range of 90-264V AC to 12V DC with a maximum current of 600mA and a power of 3W. It is characterized by a long life (MTBF 100,000 h), a slow start of 50 ms, and a maximum input current of 0.2A.
zł14.60
4 weeks
No product available!
The Step-Down converter module on the XL7015 chip converts the voltage in the range of 5-80V to 5-20V, with a maximum current of 0.8A and a recommended output power of 7W. It has protection against overheating, short circuit and current overload, and its board size is 16 x 44 mm.
zł5.72
24h
Available quantity: 22
Available
The Step-Down Converter allows you to adjust the output voltage (1.5-35V) and output current (up to 10A, 8A recommended), supporting a maximum of 150W (100W recommended) with an operating temperature of -20 to 75°C and a conversion efficiency of up to 95%. It has short-circuit protection but no reverse input protection.
zł55.50
24h
Available quantity: 3
Available
The Step-Down converter module on the MP1584EN chip converts the input voltage (9-35V) to the regulated output voltage (0.8-25V) with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm.
zł3.70
24h
Available quantity: 37
Available
The Step-Down converter module on the MP1584EN chip converts the input voltage 9-35V to output voltage 5V with a maximum current of 5A and a power of 25W. It operates in temperatures from -20°C to 75°C and has a compact size of 45 x 31 x 16 mm
zł4.45
24h
Available quantity: 119
Available
The Step-Down converter module on the MP1584EN chip converts the 4.5-28V input voltage to 12V output voltage with a maximum current of 3A and an efficiency of up to 92%. It is a compact device measuring 22 x 17 x 4 mm, operating in a temperature range of -20°C to 85°C, ideal for a variety of industrial applications.
zł4.00
24h
Available quantity: 23
Available
The Step-Down Converter Module converts 4-40V to a regulated output voltage of 1.25-36V, supporting a maximum of 8A and 200W, with a conversion efficiency of 94%. It is a compact device (61 x 41 x 27 mm) using PWM modulation, ideal for industrial applications requiring a stable output voltage.
zł12.12
4 weeks
No product available!
Step-Down converter module converts input voltage (5-23V) to adjustable output voltage (0-16.5V) with maximum current 3A, featuring high precision (1%) and efficiency (up to 95%). Compact size and display make it ideal for various applications, e.g. DIY projects
zł24.39
24h
Available quantity: 3
Available
The Step-Up Converter Module converts input voltage (8.5-50V) and input current (up to 15A) to output voltage (10-60V) and output current (up to 12A) with high conversion efficiency (96%) and overvoltage protection high intensity. The module can operate in a wide temperature range (-40 - 85°C) and frequency (150kHz), allowing constant current adjustment from 0.2 to 12A.
zł15.56
4 weeks
No product available!
AP63357 DC-DC Step-Down Converter Module with 5V output, 6 to 32V input and 3.5A maximum output current. SparkFun COM-21255
zł41.13
3 weeks
No product available!
AP3429A DC-DC Step-Down Converter Module with 3.3 V output voltage, 3.9 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21337
zł30.39
24h
Available quantity: 1
Available
AP3429A DC-DC Step-Down Converter Module with 1.8 V output voltage, 2.7 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21338
zł34.43
3 weeks
No product available!
Step-Down DC-DC converter module based on the D24V150F9 chip. Input voltage 11 ... 40V, output voltage 9V (max 15A). Pololu 2884