Step-Down converter module 7.5V/3A D30V30F7
ID: 1188221
5906623469369
zł85.19
Tax included
zł69.26 tax excl.
DC-DC Step-Down converter module. It has an input voltage from 7.5 to 45 V, an output voltage of 7.5 V and a maximum output current of up to 3 A. Pololu 4894
Description
DC-DC Step-Down converter module. It offers a constant output voltage of 7.5 V and can be powered with a voltage ranging from 7.5 to 45 V. It has a built-in output current limitation, and in continuous mode it has an efficiency of up to 3 A depending on the input voltage.
The module has an efficiency of 80% to 95%. It has a number of built-in protections, including input current limiting, undervoltage lockout and thermal shutdown.
Connections
- PG - Open drain output which goes low when the regulator output voltage increases more than 7.5% above or drops more than 9% below the nominal voltage
- VIN - input voltage
- GND - ground
- VOUT - output voltage
- EN - turning on the converter
Features
- Output voltage: 7.5 V with an accuracy of 4%
- Input voltage: 7.5V to 45V
- Efficiency from 80% to 95%, depending on the input voltage and load
- Low Power Mode (EN Input)
- Switching frequency: 700 kHz
- No-load quiescent current 10 to 20 uA per volt
- Switching current limitation
- Output current in continuous mode from 2A to 3.5A
- Protections: against overheating, soft start function, overvoltage lock
- Dimensions: 17.8 x 20.3 x 9 mm
Kit contains
- Converter module
- Goldpin male straight 6-pin connector
- Goldpin male angled 5-pin connector
1188221
Data sheet
- Output voltage
- 7,5 V
- Output current
- 3A
- Converter type
- Step-down
- Supply voltage min
- 7,5 V
- Supply voltages max
- 45 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 3
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 166
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 209
Available
Other products in the same category (16)
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
zł14.77
24h
Available quantity: 3
Available
The Step-Down D24V3F3 Buck Voltage Regulator module gives the output voltage of 3,3V with a wide input voltage range of 4.3-42V and a maximum output current of 300 mA. Pololu 2097
zł33.53
24h
Available quantity: 1
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A
zł9.73
24h
Available quantity: 42
Available
Compact and efficient 5V 3A Step-Down converter module, ideal for voltage stabilization in demanding electronic projects
zł5.84
24h
Available quantity: 4
Available
The Step-Down Converter Module converts 0.5V-26V input voltage to 0.8-25V constant, with a maximum output current of 3A, recommended up to 2.3A for long-term use. The conversion efficiency of the device is 96%, and the module size is 22.3mm x 17mm x 4.2mm.
zł5.18
24h
Available quantity: 24
Available
The compact (0.4″ × 0.5″) D24V5F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing for a maximum output current of 500 mA. Pololu 2843
zł32.50
24h
Available quantity: 9
Available
Step-Down converter with adjustable or constant output voltage from 0.8 to 17 V, input voltage from 4.5 to 24 V and a maximum current of up to 3 A
zł4.00
24h
Available quantity: 37
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.3 A and features reverse voltage protection.
zł87.23
4 weeks
No product available!
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł22.62
24h
Available quantity: 1
Available
DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896
zł88.33
24h
Available quantity: 3
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł149.10
4 weeks
No product available!
The Step-Down D24V3F9 Buck Voltage Regulator module gives the output voltage of 9V with a wide input voltage range of 11-42V and a maximum output current of 300 mA. Pololu 2099
zł34.77
4 weeks
No product available!
The DC BUCK Adapter (7.2V) is a compact switching regulator designed to power servos that communicate via serial bus. With a wide input voltage range and easy installation, the module is ideal for robotic systems and applications requiring stable 7.2 V power from various energy sources.
zł16.33
24h
Available quantity: 5
Available
An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.4 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4873
zł109.35
24h
Available quantity: 4
Available
DC-DC Step-Down converter module. It has an input voltage from 7.5 to 45 V, an output voltage of 7.5 V and a maximum output current of up to 3 A. Pololu 4894