.png)
Step-Down Voltage Regulator 1.4-7V, 3.4A D30V30MALCMA
ID: 1196573
5906623499939
zł207.87
Tax included
zł169.00 tax excl.
Efficient step-down converter that reduces the input voltage from up to 45 V to a regulated output voltage range from 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.4 A. It has built-in protection against reverse polarity, overload and short circuit, and the spread spectrum function reduces EMI interference. The module is equipped with an additional potentiometer for adjusting the cut-off voltage. Pololu 4872
Description
The D30V30 module is a high-performance buck (step-down) voltage converter that reduces input voltage to a lower value within the range of 1.4 V to 7 V. The device supports input voltages up to 45 V, and thanks to switching (SMPS) technology, it is significantly more efficient than linear voltage regulators, especially with large input-to-output voltage differences. The converter can provide a continuous output current of 1 A to 4.5 A, depending on voltage levels. It also includes multiple protection features, such as reverse polarity protection (up to 40 V), overvoltage protection, overload protection, and short-circuit protection. Additionally, the thermal shutdown function prevents overheating, while the soft-start feature limits inrush current and smoothly increases output voltage during startup.
The device has six pins: power good (PG), enable (EN), input voltage (VIN), output voltage (VOUT), and two ground (GND) terminals. The PG output signals when the output voltage exceeds permissible deviations, while the EN pin allows the module to switch to low-power mode. The EN pin is connected to a potentiometer, allowing you to adjust the circuit's cutoff voltage to your needs.
The converter features high efficiency, ranging from 80% to 95% depending on load conditions and input/output voltages. It operates with a switching frequency of approximately 700 kHz and supports a power-saving mode at low loads. Thanks to the spread spectrum function, it reduces electromagnetic interference (EMI). The module has a compact design and includes a mounting hole compatible with M2 screws. With a standard 2.54 mm pin spacing, it can be easily integrated with breadboards and other prototyping systems.
Features
- Input voltage: 3.3 V to 45 V
- Output voltage: 1.4 V to 7 V
- Precise output voltage adjustment via 11-turn potentiometer
- Maximum continuous output current: 3.4 A
- High efficiency: 80% to 95%
- Very low dropout voltage
- Switching frequency: ~700 kHz
- Power-saving mode at low loads
- Low quiescent current
- EN input allows shutdown and power-saving mode
- Potentiometer for adjusting cutoff voltage on the EN pin
- Power Good (PG) output signals improper output voltage
- Spread spectrum mode reduces peak EMI levels
- Protections: overvoltage, overcurrent, short-circuit, overheating
- Soft-start function for smooth startup and limited inrush current
- Reverse polarity protection up to 40 V
- Mounting hole: compatible with M2 screws
- 2.54 mm pin spacing, compatible with breadboards and prototyping boards
- Compact dimensions: 15.2 x 25.4 x 9 mm
Kit contains
- Voltage regulator module
- 6-pin male straight header
- 5-pin male right-angle header
1196573
Data sheet
- Output voltage
- 1,4-7 V
- Output current
- 3,4 A
- Converter type
- Step-down
- Supply voltage min
- 3,3 V
- Supply voltages max
- 45 V
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896
zł161.06
24h
Available quantity: 2
Available
DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897
zł161.04
24h
Available quantity: 2
Available
DC-DC Step-Down converter module. It has an input voltage from 3.3 to 45 V, an output voltage of 3.3 V and a maximum output current of up to 3.7 A. Pololu 4891
zł157.28
24h
Available quantity: 2
Available
DC-DC Step-Down converter module. It has an input voltage from 5 to 45 V, an output voltage of 5 V and a maximum output current of up to 3.4 A. Pololu 4892
zł145.99
24h
Available quantity: 10
Available
DC-DC Step-Down converter module. It has an input voltage from 7.5 to 45 V, an output voltage of 7.5 V and a maximum output current of up to 3 A. Pololu 4894
zł161.06
24h
Available quantity: 1
Available
Other products in the same category (16)
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł4.82
4 weeks
No product available!
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.39
24h
Available quantity: 10
Available
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł5.30
24h
Available quantity: 2005
Available
Pololu 2830
zł48.84
24h
Available quantity: 11
Available
Available
No product available!
Available
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł121.88
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.22
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł104.30
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł98.65
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł143.71
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł143.07
24h
Available quantity: 2
Available
Step-Down Voltage Regulator D24V25F5. Pololu 2850
zł98.86
24h
Available quantity: 3
Available
The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847
zł38.57
24h
Available quantity: 1
Available
Efficient step-down converter that reduces the input voltage from up to 45 V to a regulated output voltage range from 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.4 A. It has built-in protection against reverse polarity, overload and short circuit, and the spread spectrum function reduces EMI interference. The module is equipped with an additional potentiometer for adjusting the cut-off voltage. Pololu 4872