Step-Down converter module 3.3V/3.7A D30V30F3
ID: 1188218
5906623469338
zł81.83
Tax included
zł66.53 tax excl.
DC-DC Step-Down converter module. It has an input voltage from 3.3 to 45 V, an output voltage of 3.3 V and a maximum output current of up to 3.7 A. Pololu 4891
Description
DC-DC Step-Down converter module. It offers a constant output voltage of 3.3 V and can be powered with a voltage ranging from 3.3 to 45 V. It has a built-in output current limitation, and in continuous mode it has an efficiency of up to 3.7 A depending on the input voltage.
The module has an efficiency of 80% to 95%. It has a number of built-in protections, including input current limiting, undervoltage lockout and thermal shutdown.
Connections
- PG - Open drain output which goes low when the regulator output voltage increases more than 7.5% above or drops more than 9% below the nominal voltage
- VIN - input voltage
- GND - ground
- VOUT - output voltage
- EN - turning on the converter
Features
- Output voltage: 3.3 V with an accuracy of 4%
- Input voltage: 3.3 V to 45V
- Efficiency from 80% to 95%, depending on the input voltage and load
- Low Power Mode (EN Input)
- Switching frequency: 700 kHz
- No-load quiescent current 10 to 20 uA per volt
- Switching current limitation
- Output current in continuous mode from 3A to 4.5A
- Protections: against overheating, soft start function, overvoltage lock
- Dimensions: 17.8 x 20.3 x 9 mm
Kit contains
- Converter module
- Goldpin male straight 6-pin connector
- Goldpin male angled 5-pin connector
1188218
Data sheet
- Output voltage
- 3,3 V
- Converter type
- Step-down
- Supply voltage min
- 3,3 V
- Supply voltages max
- 45 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.35
24h
Available quantity: 60
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 398
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
Delivery date unknown
No product available!
Other products in the same category (16)
Step-Down converter with an output voltage of 5 V, an input voltage of 7 to 26 V and a maximum current of 3 A
zł6.58
24h
Available quantity: 12
Available
A step-down converter module that allows you to reduce the input voltage from 4–36 V to a stable 3.3 V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600 mA allows you to power microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5592
zł11.70
24h
Available quantity: 7
Available
The Step-Up Converter Module converts input voltage (8.5-50V) and input current (up to 15A) to output voltage (10-60V) and output current (up to 12A) with high conversion efficiency (96%) and overvoltage protection high intensity. The module can operate in a wide temperature range (-40 - 85°C) and frequency (150kHz), allowing constant current adjustment from 0.2 to 12A.
zł15.56
4 weeks
No product available!
Step-Down converter D36V28F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 4.5 A. Pololu 3781
zł83.26
24h
Available quantity: 1
Available
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł3.80
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40V and efficiently reduces it to 5V with an available output current of around 15A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. Pololu 2881
zł434.45
4 weeks
No product available!
Available
The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847
zł35.76
24h
Available quantity: 1
Available
A step-down converter that reduces the input voltage from 6V to 60V to a stable 6V with up to 95% efficiency and 5.5A output current. It offers low standby current (<0.2mA), soft-start, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5573
zł116.42
24h
Available quantity: 1
Available
DC-DC Step-Down converter module with 5V output voltage and 1A output current. The module can be a replacement for the popular LM7805 regulator.
zł7.88
4 weeks
No product available!
The Step-Down D24V6F9 Buck Voltage Regulator module gives the output voltage of 9V with a wide input voltage range of 11.5-42V and a maximum output current of 600 mA. Pololu 2108
zł32.61
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł88.84
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.3 A and features reverse voltage protection.
zł87.23
4 weeks
No product available!
The Step-Down D24V3F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 300 mA. Pololu 2098
zł34.17
24h
Available quantity: 4
Available
A compact voltage converter module that reduces input voltage from 6.3 to 65 V to a stable 6 V at currents up to 700 mA. It features high efficiency, low quiescent current (<0.4 mA), and short-circuit and thermal protection, ensuring safe and efficient operation. Its small size and ease of integration make it ideal for mobile devices, battery-powered designs, and systems requiring stable power. Pololu 5434
zł17.23
24h
Available quantity: 3
Available
This step-down converter module allows you to reduce the voltage from 15-60V to a stable 15V at a current of up to 8A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5679
zł220.03
24h
Available quantity: 1
Available
DC-DC Step-Down converter module. It has an input voltage from 3.3 to 45 V, an output voltage of 3.3 V and a maximum output current of up to 3.7 A. Pololu 4891