8.4V, 10A Step-Down Voltage Regulator D42V110F8
ID: 1201577
5902186330795
zł229.73
Tax included
zł186.77 tax excl.
The step-down converter module allows for voltage reduction from 8.4–60 V to a stable 8.4 V at currents up to 10 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5675
Description
Step-down (buck) converter module designed to reduce an input voltage from 8,4 V to 60 V down to a regulated 8.4 V output with a current of up to 10 A. This is a synchronous switching converter, providing high efficiency (up to 95%) and significantly lower power losses compared to traditional linear regulators. It is ideal for systems requiring high current and stable power supply, such as microcontroller circuits, motor power systems, automation, or advanced hobby projects.
The device is equipped with multiple protections, including reverse voltage protection, overcurrent protection, and thermal shutdown in case of overheating. Additionally, the built-in soft-start function limits inrush current, ensuring a smooth rise of output voltage at startup. The module also offers an ENA input for enabling/disabling the circuit and a Power Good (PG) output that indicates correct output voltage and can be used to monitor power status.
The module features a low quiescent current (<0.3 mA) and a high switching frequency of about 800 kHz, allowing the use of small filtering components. With its compact dimensions and four mounting holes, the regulator can be easily installed in almost any project. The board includes convenient solder pads for connecting power wires or 5 mm screw terminals. Thanks to its wide input voltage range and high output power, the converter provides a reliable source of stable power in systems that require low voltage, high current, and excellent energy efficiency.
Features
- D42V110F8 step-down (buck) converter
- Input voltage: 8.4 V – 60 V
- Output voltage: 8.4 V ±3%
- Maximum output current: 10 A (typical at 42 V input)
- Efficiency: 80–95% depending on load
- Switching frequency: approx. 800 kHz
- Quiescent current: < 0.3 mA (typical)
- ENA input: allows load disconnection and low-power mode
- Power Good (PG) output: indicates correct output voltage
- Operating modes: PFM/FPWM – switched depending on load
- Protections: overcurrent, thermal, short-circuit, and reverse voltage
- Soft-start function: gradual voltage ramp-up at startup
- Dimensions: 31.8 × 43.2 × 9 mm
- Mounting: 4 mounting holes Ø 2.2 mm
- Weight: 15 g
1201577
Data sheet
- Output voltage
- 8.4V
- Output current
- 10A
- Converter type
- Step-down
- Supply voltage min
- 8,5 V
- Supply voltages max
- 60 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 3476
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 19010
Available
Other products in the same category (16)
A compact voltage converter module that reduces input voltage from 5.2 to 65 V to a stable 5 V at currents up to 700 mA. It features high efficiency, low quiescent current (<0.2 mA), and short-circuit and thermal protection, ensuring safe and efficient operation. Its small size and ease of integration make it ideal for mobile devices, battery-powered designs, and systems requiring stable power. Pololu 5433
zł17.23
4 weeks
No product available!
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
zł21.45
4 weeks
No product available!
A compact buck module that reduces input voltage from 4 to 65 V to a stable 3.3 V at up to 700 mA. It features high efficiency, low quiescent current (<0.2 mA), and short-circuit and thermal protection, ensuring safe and efficient operation. Its small size and ease of integration make it ideal for mobile devices, battery-powered designs, and systems requiring stable power. Pololu 5432
zł17.23
4 weeks
No product available!
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł26.40
4 weeks
No product available!
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.24
4 weeks
No product available!
An efficient step-down converter that reduces the input voltage to 12 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<50 μA). It supports input voltage from 12 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5377
zł23.43
4 weeks
No product available!
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł3.92
24h
Available quantity: 967
Available
Step-Down DC-DC converter module based on the D24V150F9 chip. Input voltage 11 ... 40V, output voltage 9V (max 15A). Pololu 2884
zł485.70
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł116.75
24h
Available quantity: 1
Available
The Step-Down D24V3F3 Buck Voltage Regulator module gives the output voltage of 3,3V with a wide input voltage range of 4.3-42V and a maximum output current of 300 mA. Pololu 2097
zł33.53
24h
Available quantity: 1
Available
The Step-Down Converter allows you to adjust the output voltage (1.5-35V) and output current (up to 10A, 8A recommended), supporting a maximum of 150W (100W recommended) with an operating temperature of -20 to 75°C and a conversion efficiency of up to 95%. It has short-circuit protection but no reverse input protection.
zł55.50
24h
Available quantity: 3
Available
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025
zł43.96
24h
Available quantity: 4
Available
An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltage from 5 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5373
zł23.43
4 weeks
No product available!
A boost charger module that allows you to charge batteries from USB, DC, or solar panels, and power devices requiring 5V. Equipped with the BQ25185 and TPS61023, it provides high efficiency, optimized power consumption, and support for 500mAh or larger batteries. Adafruit 6106
zł49.73
4 weeks
No product available!
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
zł14.77
4 weeks
No product available!
The Step-Down converter module converts the input voltage of 5.3 - 26 V to a constant 3.3 V, with a maximum output current of 3 A, recommended up to 1.8 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł3.90
4 weeks
No product available!
The step-down converter module allows for voltage reduction from 8.4–60 V to a stable 8.4 V at currents up to 10 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5675