

AP63357 DC-DC Step-Down Converter Module with 5 V output voltage and 6 to 5.5 V input voltage. The maximum current load of the module can be up to 3.5 A. The operation of the converter is controlled by the EN (enable) pin, and in order to To dissipate excess heat, a heatsink mounting pad is available on the bottom of the board. The board has a screw connector to facilitate the connection of wires. Full documentation is available on the product page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
DC-DC Step-Down converter module AP63203 with an output voltage of 3.3 V, an input voltage of 3.8 to 32 V and a maximum output current of 2 A. SparkFun COM-18357
No product available!
DC-DC Step-Down Converter Module AP63357 with 5V output voltage, 3.8 to 32V input voltage and 3.5A maximum output current. It has a very small board format, so it can be used in any project. SparkFun COM-21256
AP3429A DC-DC Step-Down Converter Module with 3.3 V output voltage, 3.9 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21337
No product available!
AP3429A DC-DC Step-Down Converter Module with 1.8 V output voltage, 2.7 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21338
No product available!
Step-Down converter D36V28F5 with an output voltage of 5 V, an input voltage from 5.3 to 50 V and a maximum output current of 4 A. Pololu 3782
Step-Down converter D36V50F5 with an output voltage of 5 V, an input voltage from 5.5 to 50 V and a maximum output current of 8 A. Pololu 4091
No product available!
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
The Step-Down D24V3F12 Buck Voltage Regulator module gives the output voltage of 12V with a wide input voltage range of 14.5-42V and a maximum output current of 300 mA. Pololu 2100
No product available!
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4855
The 4-channel Step-Down Converter module converts voltages in the range of 13.5-30V to 3.3V, 5V, 12V or regulated 2-28V, with a maximum current of 3A per channel and a total power of 50W. It includes protections and shutdown functions and can operate in temperatures from -40°C to +85°C.
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
No product available!
Step-Down Voltage Regulator D24V25F5. Pololu 2850
The Step-Down Converter Module converts 0.5V-26V input voltage to 0.8-25V constant, with a maximum output current of 3A, recommended up to 2.3A for long-term use. The conversion efficiency of the device is 96%, and the module size is 22.3mm x 17mm x 4.2mm.
Step-Down converter D36V28F12 with an output voltage of 12 V, an input voltage from 12.9 to 50 V and a maximum output current of 3.3 A. Pololu 3786
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4854
Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A
Step-Down converter with adjustable output voltage from 1.25 to 36 V, input voltage from 4 to 38 V and maximum current up to 5 A
No product available!
Step-Down converter with input voltage up to 36 V which effectively reduces it to 3.3 V, while maintaining current up to 500 mA. Pololu 2842
AP63357 DC-DC Step-Down Converter Module with 5V output, 6 to 32V input and 3.5A maximum output current. SparkFun COM-21255