Buck Regulator Breakout - DC-DC Step-Down Converter Module 1.8V 2A AP3429A
ID: 1186196
5906623418350
zł30.37
Tax included
zł24.69 tax excl.
AP3429A DC-DC Step-Down Converter Module with 1.8 V output voltage, 2.7 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21338
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
DC-DC Step-Down AP3429A converter module with an output voltage of 1.8 V and an input voltage of 2.7 to 5.5 V. The maximum current load of the module can be up to 2 A. The operation of the converter is controlled by the EN pin (enable), and to dissipate excess heat, a heatsink mounting pad is provided on the bottom of the board. The board has a screw connector to facilitate the connection of wires. Full documentation is available on the product page.
Features
- Output voltage: 1.8V
- Input voltage: 2.7 to 5.5 V
- Type. maximum current: 2A
- Switching frequency: 1MHz
- Quiescent current 90µA without load
- Screw connector, pads for DC connector or 2.54 mm connector
- Security:
- Undervoltage lockout (UVLO)
- Input surge protection
- Overcurrent protection
- Thermal shutdown 160 °C
- Dimensions: 12.7 x 10.2mm
1186196
Data sheet
- Output voltage
- 1,8 V
- Output current
- 2A
- Converter type
- Step-down
- Supply voltage min
- 2,7 V
- Supply voltages max
- 5,5 V
Other products in the same category (16)
Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors
zł23.35
24h
Available quantity: 1
Available
The panel Step-Down converter module enables precise voltage and current regulation, characterized by high efficiency, built-in protections and an RS485 interface with support for the Modbus protocol, ideal for applications requiring precise power control
zł273.22
24h
Available quantity: 2
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 15 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł35.14
24h
Available quantity: 1
Available
No product available!
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
zł29.70
24h
Available quantity: 2
Available
AP3429A DC-DC Step-Down Converter Module with 3.3 V output voltage, 3.9 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21337
zł29.61
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł81.11
24h
Available quantity: 1
Available
Step-Down converter with input voltage up to 36 V which effectively reduces it to 3.3 V, while maintaining current up to 500 mA. Pololu 2842
zł25.06
6 weeks
No product available!
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł4.10
24h
Available quantity: 826
Available
The Step-Down Converter allows you to adjust the output voltage (1.5-35V) and output current (up to 10A, 8A recommended), supporting a maximum of 150W (100W recommended) with an operating temperature of -20 to 75°C and a conversion efficiency of up to 95%. It has short-circuit protection but no reverse input protection.
zł58.30
24h
Available quantity: 4
Available
The Step-Down D24V6F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 600 mA. Pololu 2107
zł33.91
24h
Available quantity: 2
Available
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4874
zł92.25
24h
Available quantity: 3
Available
Step-Down converter with an output voltage of 5 V, input voltage from 9 to 36 V and a maximum current of 5 A. The board is equipped with a DC input connector and an output USB connector
zł14.96
6 weeks
No product available!
Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885
zł499.96
24h
Available quantity: 1
Available
Step-down converter with adjustable output voltage 1.2V-35V and current efficiency 9A. The module allows to limit the current consumption at the output via a multi-turn potentiometer. modxl4016sd
zł16.68
6 weeks
No product available!
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
zł14.90
6 weeks
No product available!
AP3429A DC-DC Step-Down Converter Module with 1.8 V output voltage, 2.7 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21338