DC-DC inverter module Step-Down 6.2 ... 50V - 6V D36V6F6
ID: 572721
5906623479160
zł20.70
Tax included
zł16.83 tax excl.
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793
Description
Step-Down DC / DC converter (D36V6F6) that reduces the input voltage (6.2 ... 50 V) to 6 V. The maximum current efficiency of the inverter module is 600 mA, it is the maximum continuous current that can be taken from the inverter. The efficiency of the converter ranges from 80 to 90%, which makes it a much better solution than linear voltage stabilizers. The inverter has protection against short-circuiting output and temperature protection. The inverter module has an additional pin allowing to turn off the inverter output. Due to its small size, it will be used in any project requiring stable power supply.
Attention!
In the case of an input voltage exceeding 28 V, the manufacturer recommends placing an additional electrolytic capacitor (at least 33uF) between the VIN and GND pins.
properties
- Input voltage: 6.2 ... 50 V
- Output voltage: 6 V
- Maximum continuous current consumed: 600 mA
- High efficiency: 80-90%
- Built-in security:
- before shorting the output
- temperature protection
- Switching frequency 2.1 MHz
- Low quiescent current: <0.1 mA
- Dimensions: 13 x 10 x 3 mm
- Weight: 0.5 g
Included
- D36V6F6 inverter module
- Straight 4 pin male connector
- Male connector, angled 4 pin
572721
Data sheet
- Output voltage
- 6.0V
- Output current
- 0.6A
- Converter type
- Step-down
- Supply voltage min
- 6,2 V
- Supply voltages max
- 50 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł4.77
24h
Available quantity: 4
Available
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.18
24h
Available quantity: 1
Available
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł3.80
Delivery date unknown
No product available!
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
zł20.65
24h
Available quantity: 5
Available
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
zł21.19
24h
Available quantity: 5
Available
Other products in the same category (16)
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł4.77
24h
Available quantity: 4
Available
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.18
24h
Available quantity: 1
Available
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł3.80
4 weeks
No product available!
Pololu 2830
zł43.01
24h
Available quantity: 3
Available
Available
No product available!
Available
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł88.84
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł91.16
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł138.88
24h
Available quantity: 1
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł117.07
24h
Available quantity: 4
Available
Step-Down Voltage Regulator D24V25F5. Pololu 2850
zł82.64
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847
zł35.76
24h
Available quantity: 1
Available
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793