DC-DC inverter module Step-Down 5.2 ... 50V - 5V D36V6F5
ID: 572720
5906623479153
zł22.63
Tax included
zł18.40 tax excl.
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
Description
Step-Down DC / DC converter (D36V6F5 chip), which reduces the input voltage (5.2 ... 50 V) to 5 V. The maximum current efficiency of the inverter module is 600 mA, it is the maximum continuous current that can be taken from the inverter. The efficiency of the converter ranges from 80 to 90%, which makes it a much better solution than linear voltage stabilizers. The inverter has protection against short-circuiting output and temperature protection. The inverter module has an additional pin allowing to turn off the inverter output. Due to its small size, it will be used in any project requiring stable power supply.
Attention!
In the case of an input voltage exceeding 28 V, the manufacturer recommends placing an additional electrolytic capacitor (at least 33uF) between the VIN and GND pins.
properties
- Based on the D36V6F5 chip
- Input voltage: 5.2 ... 50 V
- Output voltage: 5 V
- Maximum continuous current consumed: 600 mA
- High efficiency: 80-90%
- Built-in security:
- before shorting the output
- temperature protection
- Switching frequency 2.1 MHz
- Low quiescent current: <0.1 mA
- Dimensions: 13 mm x 10 mm x 3 mm
- Weight: 0.5 g
Included
- D36V6F5 inverter module
- Male goldpin connector, 4 pin
- Male goldpin connector 4-pin
572720
Data sheet
- Output voltage
- 5th
- Output current
- 0.6A
- Converter type
- Step-down
- Supply voltage min
- 5,2 V
- Supply voltages max
- 50 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł4.77
24h
Available quantity: 120
Available
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.97
24h
Available quantity: 4
Available
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł3.85
24h
Available quantity: 35
Available
No product available!
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
zł22.62
24h
Available quantity: 3
Available
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793
zł22.62
24h
Available quantity: 2
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł26.40
24h
Available quantity: 1
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 15 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł27.85
24h
Available quantity: 1
Available
Other products in the same category (16)
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.3 A and features reverse voltage protection.
zł87.23
4 weeks
No product available!
The Step-Down D24V3F9 Buck Voltage Regulator module gives the output voltage of 9V with a wide input voltage range of 11-42V and a maximum output current of 300 mA. Pololu 2099
zł34.77
4 weeks
No product available!
Step-Down converter with an output voltage of 5 V, an input voltage of 7 to 26 V and a maximum current of 3 A
zł6.58
24h
Available quantity: 298
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł116.75
24h
Available quantity: 6
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40V and efficiently reduces it to 5V with an available output current of around 15A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. Pololu 2881
zł434.45
24h
Available quantity: 1
Available
The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.08
4 weeks
No product available!
Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors
zł23.59
24h
Available quantity: 5
Available
The Step-Down D24V6F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 600 mA. Pololu 2107
zł41.72
24h
Available quantity: 1
Available
No product available!
The very small step-down 6 V, 2.5 A synchronous inverter can be supplied with voltage up to 36 V, dimensions: 17.8 mm x 17.8 mm. Pololu 2859
zł87.23
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł91.16
24h
Available quantity: 2
Available
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025
zł43.96
24h
Available quantity: 6
Available
DC-DC Step Down converter module with input voltage from 7 to 24 V and output voltage of 5 V. Can supply currents up to 4 A. DFRobot DFR0831
zł22.12
24h
Available quantity: 2
Available
An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltages from 5 V to 65 V, has short circuit and overheating protection, making it a reliable and energy-efficient solution. Pololu 5363
zł23.43
4 weeks
No product available!
The Step-Down D24V6F12 Buck Voltage Regulator module gives the output voltage of 12V with a wide input voltage range of 15-42V and a maximum output current of 600 mA. Pololu 2109
zł34.82
4 weeks
No product available!
Step-Down converter D36V50F9 with an output voltage of 9 V, an input voltage from 9.9 to 50 V and a maximum output current of 7 A. Pololu 4094
zł156.87
24h
Available quantity: 1
Available
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792