Buck Regulator Breakout - DC-DC Step-Down Converter Module 3.3V 2A AP3429A
ID: 1186195
5906623418343
zł30.39
Tax included
zł24.71 tax excl.
AP3429A DC-DC Step-Down Converter Module with 3.3 V output voltage, 3.9 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21337
Description
DC-DC Step-Down AP3429A converter module with an output voltage of 3.3 V and an input voltage of 3.9 to 5.5 V. The maximum current load of the module can be up to 2 A. The operation of the converter is controlled by the EN pin (enable), and to dissipate excess heat, a heatsink mounting pad is provided on the bottom of the board. The board has a screw connector to facilitate the connection of wires. Full documentation is available on the product page.
Features
- Output voltage: 3.3V
- Input voltage: 3.9 to 5.5 V
- Type. maximum current: 2A
- Switching frequency: 1MHz
- Quiescent current 90µA without load
- Screw connector, pads for DC connector or 2.54 mm connector
- Security:
- Undervoltage lockout (UVLO)
- Input surge protection
- Overcurrent protection
- Thermal shutdown 160 °C
- Dimensions: 12.7 x 10.2mm
1186195
Data sheet
- Output voltage
- 3,3 V
- Output current
- 2A
- Converter type
- Step-down
- Supply voltage min
- 3,8 V
- Supply voltages max
- 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DC-DC Step-Down Converter Module AP63357 with 5V output voltage, 3.8 to 32V input voltage and 3.5A maximum output current. It has a very small board format, so it can be used in any project. SparkFun COM-21256
zł31.64
24h
Available quantity: 3
Available
AP63357 DC-DC Step-Down Converter Module with 5V output, 6 to 32V input and 3.5A maximum output current. SparkFun COM-21255
zł41.13
24h
Available quantity: 1
Available
AP3429A DC-DC Step-Down Converter Module with 1.8 V output voltage, 2.7 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21338
zł34.43
24h
Available quantity: 1
Available
Other products in the same category (16)
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
zł465.09
4 weeks
No product available!
Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885
zł470.35
24h
Available quantity: 2
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 6 V with an available output current of around 15 A. Pololu 2882
zł466.10
4 weeks
No product available!
The Step-Up Buck Voltage Regulator module with output voltage of 3.3V and input voltage range of 1-3V and a maximum output current of 200 mA. STMicroelectronics EVAL4971
zł69.50
24h
Available quantity: 1
Available
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
zł20.65
24h
Available quantity: 4
Available
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
zł21.19
24h
Available quantity: 2
Available
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793
zł20.70
24h
Available quantity: 5
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł25.88
24h
Available quantity: 2
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł22.29
24h
Available quantity: 2
Available
Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796
zł21.21
24h
Available quantity: 11
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 15 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł26.84
24h
Available quantity: 1
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a lower, user-adjustable voltage set by an on-board trimmer potentiometer. It has an output voltage range of 2.5 V to 7.5 V and a maximum output current of 600 mA.
zł35.84
4 weeks
No product available!
This compact switching step-down voltage regulator. It has an output voltage range of 4 V to 25 V and a maximum output current of 600 mA. Pololu 3799
zł34.12
24h
Available quantity: 2
Available
Step-down converter with adjustable output voltage 1.2V-35V and current efficiency 9A. The module allows to limit the current consumption at the output via a multi-turn potentiometer. modxl4016sd
zł16.40
24h
Available quantity: 19
Available
DC-DC Step-Down converter module with 5V output voltage and 1A output current. The module can be a replacement for the popular LM7805 regulator.
zł7.53
24h
Available quantity: 196
Available
Step-Down converter module with input voltage from 4.75 to 23V, output voltage from 1 to 17V and output current 1.8 A (3 A instantaneous current).
zł6.84
24h
Available quantity: 25
Available
AP3429A DC-DC Step-Down Converter Module with 3.3 V output voltage, 3.9 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21337