DC-DC converter module Step-Down 14.5 ... 40V - 12V D24V150F12
ID: 563265
5906623412938
zł460.01
Tax included
zł373.99 tax excl.
Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885
Description
Step-Down DC / DC converter which reduces the input voltage to 12 V. The maximum current capacity of the inverter module is 15 A, it is the maximum continuous current that can be taken from the inverter. The efficiency of the converter ranges from 85 to 95%, which makes it a much better solution than linear voltage stabilizers. The inverter has reverse voltage protection, protection against short-circuiting output, soft start system and temperature protection.
The inverter manufacturer has derived two additional signals, "enable", by means of which the inverter can be switched on or off and the "power-good" output, the state of which changes when the inverter is unable to maintain a stable voltage. The typical current consumption of the inverter is about 100 mA, while in the low-power mode the inverter takes about 5-10 uA for each volt of the input voltage.
properties
- Input voltage: 14.5 ... 40 V
- Output voltage: 12 V
- The maximum continuous current consumed: 15 A
- High efficiency: 85-95%
- Built-in security:
- against backward tension
- before shorting the output
- soft start system
- temperature protection
- The current consumed by the inverter with no load: approx. 100 mA
- The current consumed by the unloaded converter in low power mode: 5-10 uA for each volt of the input voltage
- The "power-good" signal informing about the state of the output voltage
- 4 mounting holes
- Dimensions: 43.2 mm x 31.8 mm x 11 mm
- Weight: 19 g (without soldered connectors)
563265
Data sheet
- Output voltage
- 12V
- Output current
- 15 A
- Converter type
- Step-down
- Supply voltage min
- 14,5 V
- Supply voltages max
- 40 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pololu 2830
zł43.01
24h
Available quantity: 3
Available
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
zł465.09
Delivery date unknown
No product available!
Other products in the same category (16)
A step-down converter that reduces the input voltage from 9V to 60V to a stable 9V with up to 95% efficiency and 5A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5576
zł120.68
4 weeks
No product available!
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.50
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł91.16
24h
Available quantity: 2
Available
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.18
24h
Available quantity: 1
Available
The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.08
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
zł82.07
24h
Available quantity: 2
Available
A step-down converter module that allows for input voltage reduction from 6.1–36V to a stable 6V level, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5594
zł11.94
24h
Available quantity: 5
Available
Step-Down converter D36V50F6 with an output voltage of 6 V, an input voltage from 6.5 to 50 V and a maximum output current of 8 A. Pololu 4092
zł123.28
24h
Available quantity: 2
Available
Step-Down converter D36V50F9 with an output voltage of 9 V, an input voltage from 9.9 to 50 V and a maximum output current of 7 A. Pololu 4094
zł156.87
4 weeks
No product available!
Step-Down converter module with input voltage from 4.75 to 23V, output voltage from 1 to 17V and output current 1.8 A (3 A instantaneous current).
zł6.84
24h
Available quantity: 28
Available
DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897
zł88.33
24h
Available quantity: 3
Available
Step-Down converter D36V28F6 with an output voltage of 6 V, an input voltage from 6.3 to 50 V and a maximum output current of 4 A. Pololu 3783
zł112.72
24h
Available quantity: 1
Available
The Step-Up Converter Module converts input voltage (8.5-50V) and input current (up to 15A) to output voltage (10-60V) and output current (up to 12A) with high conversion efficiency (96%) and overvoltage protection high intensity. The module can operate in a wide temperature range (-40 - 85°C) and frequency (150kHz), allowing constant current adjustment from 0.2 to 12A.
zł15.56
4 weeks
No product available!
A step-down converter that reduces the input voltage from 12V to 60V to a stable 12V with up to 95% efficiency and up to 4.5A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5577
zł120.68
4 weeks
No product available!
The panel Step-Down converter module enables precise voltage and current regulation, characterized by high efficiency, built-in protections and an RS485 interface with support for the Modbus protocol, ideal for applications requiring precise power control
zł259.90
24h
Available quantity: 1
Available
The Step-Down converter module converts the input voltage of 11 - 26 V to a constant 9 V, with a maximum output current of 3 A, recommended up to 1.1 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.31
24h
Available quantity: 5
Available
Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885