zł14.83 tax excl.
A compact voltage converter module that reduces input voltage from 9.4 to 65 V to a stable 9 V at up to 700 mA. It features high efficiency, low quiescent current (<0.2 mA), and short-circuit and thermal protection, ensuring safe and efficient operation. Its small size and ease of integration make it ideal for mobile devices, battery-powered designs, and systems requiring stable power. Pololu 5436
The D45V5F9 is a high-performance buck (step-down) converter module that reduces the input voltage to a stable 9 V output while maintaining high efficiency. The device supports input voltages in the range of 9.4 V to 65 V and can deliver up to 700 mA of output current, depending on operating conditions. By using switching regulator (SMPS) technology, it achieves significantly higher efficiency than traditional linear regulators, which is particularly important when there is a large difference between input and output voltages. The module features an extremely low quiescent current (<0.2 mA) and a switching frequency of 1.1 MHz, ensuring stable operation under normal loads and high efficiency under light loads. It also includes short-circuit protection and thermal protection, ensuring safe and reliable operation.

The converter has three main pins: VIN (input voltage), GND (ground), and VOUT (output voltage). With its compact dimensions and lightweight design, it is ideal for use in mobile devices, battery-powered projects, and systems requiring a stable 9 V supply over a wide input voltage range. Its design allows easy integration into various electronic circuits while providing high reliability and overload protection.

Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40V and efficiently reduces it to 5V with an available output current of around 15A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. Pololu 2881
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
No product available!
Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 6 V with an available output current of around 15 A. Pololu 2882
No product available!
The Step-Up Buck Voltage Regulator module with output voltage of 3.3V and input voltage range of 1-3V and a maximum output current of 200 mA. STMicroelectronics EVAL4971
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 15 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages between 4 V and 50 V and efficiently reduces them to a lower, user-adjustable voltage set by an on-board trimmer potentiometer. It has an output voltage range of 2.5 V to 7.5 V and a maximum output current of 600 mA.
No product available!
This compact switching step-down voltage regulator. It has an output voltage range of 4 V to 25 V and a maximum output current of 600 mA. Pololu 3799
Step-down converter with adjustable output voltage 1.2V-35V and current efficiency 9A. The module allows to limit the current consumption at the output via a multi-turn potentiometer. modxl4016sd
No product available!
DC-DC Step-Down converter module with 5V output voltage and 1A output current. The module can be a replacement for the popular LM7805 regulator.
No product available!
A compact voltage converter module that reduces input voltage from 9.4 to 65 V to a stable 9 V at up to 700 mA. It features high efficiency, low quiescent current (<0.2 mA), and short-circuit and thermal protection, ensuring safe and efficient operation. Its small size and ease of integration make it ideal for mobile devices, battery-powered designs, and systems requiring stable power. Pololu 5436