Step-Down Voltage Regulator 1.4-7V, 3.8A D30V33MAL

Description

The D30V33 module is a high-efficiency buck (step-down) voltage converter that reduces input voltage to a lower value within the range of 1.4 V to 7 V. The device supports input voltages up to 45 V, and thanks to switching (SMPS) technology, it is significantly more efficient than linear voltage regulators, especially with large input-to-output voltage differences. The converter can provide a continuous output current from 3 A to 5 A, depending on voltage levels. It also features multiple protection mechanisms, including reverse polarity protection (up to 40 V), overvoltage protection, overload protection, and short-circuit protection. Additionally, the thermal shutdown function prevents overheating, while the soft-start feature limits inrush current and smoothly increases output voltage during startup.

The device has six pins: power good (PG), enable (EN), input voltage (VIN), output voltage (VOUT), and two ground (GND) terminals. The PG output signals when the output voltage exceeds permissible deviations, while the EN pin allows the module to switch to low-power mode.

The converter features high efficiency, ranging from 80% to 95%, depending on load conditions and input/output voltages. It operates at a switching frequency of approximately 700 kHz and supports a power-saving mode at low loads. Thanks to the spread spectrum function, it reduces electromagnetic interference (EMI). The module has a compact design and includes a mounting hole compatible with M2 screws. With a standard 2.54 mm pin spacing, it can be easily integrated with breadboards and other prototyping systems.

Features

• Input voltage: 3.3 V to 45 V
• Output voltage: 1.4 V to 7 V
• Precise output voltage adjustment via 11-turn potentiometer
• Maximum continuous output current: 3.8 A
• High efficiency: 80% to 95%
• Very low dropout voltage
• Switching frequency: ~700 kHz
• Power-saving mode at low loads
• Low quiescent current
• EN input allows shutdown and power-saving mode
• Power Good (PG) output signals improper output voltage
• Spread spectrum mode reduces peak EMI levels
• Protections: overvoltage, overcurrent, short-circuit, overheating
• Soft-start function for smooth startup and limited inrush current
• Reverse polarity protection up to 40 V
• Mounting hole: compatible with M2 screws
• 2.54 mm pin spacing, compatible with breadboards and prototyping boards
• Compact dimensions: 22.9 x 30.5 x 7.7 mm

Kit contains

• Voltage regulator module
• 6-pin male straight header
• 2 x 2-pin terminal