18V, 4A Step-Down Voltage Regulator D42V55F18
ID: 1199012
5902186322868
zł118.47
Tax included
zł96.32 tax excl.
A synchronous step-down converter that reduces input voltage from 18V to 60V to a stable 18V with up to 95% efficiency and 4A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5578
Description
The D42V55F18 voltage regulator is a high-performance synchronous buck (step-down) converter designed to step down input voltages up to 60 V to a stable 18 V. It features a low no-load current consumption (<0.2 mA), making it energy-efficient even in standby mode. Its compact dimensions allow installation in space-constrained environments. The D42V55F18 is an ideal solution for microprocessor systems, IoT devices, automation, and hobby projects where stable 18 V power with high efficiency and operational safety is required.
Thanks to the use of switching technology (SMPS, DC-DC), the converter achieves significantly higher efficiency (up to 95%) compared to traditional linear regulators, minimizing energy losses and heat generation. This model can supply a continuous output current of 2.5 A to 6 A at lower input voltages, ensuring stable power even for demanding circuits. The unit is equipped with reverse voltage protection, overcurrent protection, and thermal shutdown, ensuring high reliability under harsh operating conditions. The soft-start function limits inrush current and gradually increases voltage during startup, protecting connected devices.
The converter offers a set of pins enabling flexible integration with the power system. VOUT provides a regulated 18 V output, while GND serves as the common reference (ground). VIN is used to supply the input voltage, with the minimum operating voltage depending on the output voltage and dropout. The VRP pin outputs the input voltage after reverse-voltage protection and can serve as an output for powering other devices or as an alternative input bypassing the protection. Additionally, the PG (Power Good) pin is an open-drain output indicating proper output voltage, and the EN pin allows enabling or disabling the converter, including in low-power mode.
Features
- Input voltage: 18 V to 60 V
- Output voltage: 18 V ±3%
- Maximum continuous output current: 2.5 A to 6 A (depending on input voltage)
- Efficiency: up to 95% (typically 90%–95%)
- Switching frequency: ~400 kHz
- No-load current consumption: < 0.2 mA
- Low-power mode (ENABLE): < 0.1 mA
- ENABLE pin for remote on/off control
- Power-Good output for voltage monitoring
- Soft-start function limiting inrush current
- Reverse voltage protection
- Overcurrent and thermal protection
- Dimensions: 25.4 x 25.4 x 9 mm
- Three mounting holes 0.086″ (for #2 or M2 screws)
1199012
Data sheet
- Output voltage
- 18 V
- Output current
- 6A
- Converter type
- Step-down
- Supply voltage min
- 18 V
- Supply voltages max
- 60 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 11421
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 16796
Available
Other products in the same category (16)
The Step-Down D24V6F12 Buck Voltage Regulator module gives the output voltage of 12V with a wide input voltage range of 15-42V and a maximum output current of 600 mA. Pololu 2109
zł34.82
4 weeks
No product available!
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł4.77
4 weeks
No product available!
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.18
4 weeks
No product available!
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł4.31
24h
Available quantity: 732
Available
Pololu 2830
zł44.46
24h
Available quantity: 5
Available
Available
No product available!
Available
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł88.84
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł91.16
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł138.88
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł112.14
24h
Available quantity: 2
Available
Step-Down Voltage Regulator D24V25F5. Pololu 2850
zł87.03
24h
Available quantity: 2
Available
A synchronous step-down converter that reduces input voltage from 18V to 60V to a stable 18V with up to 95% efficiency and 4A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5578