Step-Down converter module with voltmeter and ammeter 1.3-32V 12A

The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847

Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4875

DC-DC Step-Down Converter Module AP63357 with 5V output voltage, 3.8 to 32V input voltage and 3.5A maximum output current. It has a very small board format, so it can be used in any project. SparkFun COM-21256

The Step-Down D24V3F3 Buck Voltage Regulator module gives the output voltage of 3,3V with a wide input voltage range of 4.3-42V and a maximum output current of 300 mA. Pololu 2097

An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltage from 5 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5373

Efficient step-down converter that reduces the input voltage from up to 45 V to a regulated output voltage range from 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.8 A. It has built-in protection against reverse polarity, overload and short circuit, and the spread spectrum function reduces EMI interference. The module is equipped with an additional potentiometer for adjusting the cut-off voltage. Pololu 4852

Step-down converter with adjustable output voltage 1.2V-35V and current efficiency 9A. The module allows to limit the current consumption at the output via a multi-turn potentiometer. modxl4016sd

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

AP63357 DC-DC Step-Down Converter Module with 5V output, 6 to 32V input and 3.5A maximum output current. SparkFun COM-21255

Power module based on a DC-DC Step-Down converter with a current efficiency of up to 20 A. The output voltage is adjustable in the range from 0 V to 50 V. The power supply offers power up to 1000 W. WZ5020L

DC-DC Step-Down converter module. It has an input voltage from 7.5 to 45 V, an output voltage of 7.5 V and a maximum output current of up to 3 A. Pololu 4894

Pololu 2830

Waterproof DC-DC Step-Down Converter with 8 to 22V input voltage and 5V 3A USB output

The Step-Down converter module on the XL7015 chip converts the voltage in the range of 5-80V to 5-20V, with a maximum current of 0.8A and a recommended output power of 7W. It has protection against overheating, short circuit and current overload, and its board size is 16 x 44 mm.

An efficient step-down converter that reduces the input voltage to 3.3 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltages from 3.3 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5372

DC-DC Step-Down converter module AP63203 with an output voltage of 3.3 V, an input voltage of 3.8 to 32 V and a maximum output current of 2 A. SparkFun COM-18357