1.25-36V 5A DC-DC Step-Down Converter Module with Voltmeter
ID: 585147
5906623462377
zł18.56
Tax included
zł15.09 tax excl.
Step-Down converter with adjustable output voltage from 1.25 to 36 V, input voltage from 4 to 38 V and maximum current up to 5 A. Board equipped with a voltmeter with display
Description
Step-Down converter module with an output voltage regulated by a potentiometer from 1.25 to 36 V and an input voltage from 4 to 38 V. The maximum current load of the module is up to 5 A. The board has a voltmeter with a segment display, on which you can monitor the voltage input or output (switched using buttons). The module has a built-in voltmeter calibration function.
Calibration procedure:
- Press the right button for approx. 2 seconds and then release. The display and the OUT LED (or IN depending on the calibrated voltage) flash synchronously.
- Use the buttons to adjust the voltage to the currently measured voltage on the inverter connector.
- Press the Right button again for 2 seconds, then release to exit Calibration Mode and save changes.
Features
- Input voltage: 4 to 38 V
- Output voltage: 1.25 to 36V
- Type. maximum current: up to 5 A.
- Power: 75 W
- Overheating and overload protection
- Conversion efficiency: up to 96%
- Working frequency: 180 kHz
- Dimensions: 66 x 39 x 18 mm
585147
Data sheet
- Output voltage
- 1,25 - 36 V
- Output current
- 5A
- Converter type
- Step-down
- Supply voltage min
- 4 V
- Supply voltages max
- 38 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Step-Up/Step-DownS7V8A Buck Voltage Regulator module with adjustable output voltage in range of 2.5-8V, input voltage range of 2.7-11.8V and a maximum output current of 0.5-1A. Pololu 2118
zł37.69
24h
Available quantity: 1
Available
Step-Up converter U3V70F15 with an output voltage of 15 V, an input voltage from 2.9 to 15 V and a maximum output current of 10 A. Pololu 2896
zł89.75
Delivery date unknown
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output on a 5.08 mm ARK screw connector. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł29.50
24h
Available quantity: 3
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and USB typ A output. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł35.49
24h
Available quantity: 4
Available
DC-DC Step Down converter module with input voltage from 7 to 24 V and output voltage of 5 V. Can supply currents up to 4 A. DFRobot DFR0831
zł22.39
Delivery date unknown
No product available!
Other products in the same category (16)
Step-down converter with adjustable output voltage 1.2V-35V and current efficiency 9A. The module allows to limit the current consumption at the output via a multi-turn potentiometer. modxl4016sd
zł16.97
4 weeks
No product available!
A power supply based on a DC-DC converter with a current capacity of up to 5.1 A. The input voltage can range from 5 V to 30 V, while the output voltage is adjustable from 0 V to 36 V. XY3605
zł277.72
24h
Available quantity: 2
Available
Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors
zł23.59
24h
Available quantity: 5
Available
An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.4 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4873
zł109.35
24h
Available quantity: 4
Available
The Step-Down D24V3F3 Buck Voltage Regulator module gives the output voltage of 3,3V with a wide input voltage range of 4.3-42V and a maximum output current of 300 mA. Pololu 2097
zł33.53
4 weeks
No product available!
Step-Down converter module with input voltage from 4.75 to 23V, output voltage from 1 to 17V and output current 1.8 A (3 A instantaneous current).
zł7.70
24h
Available quantity: 31
Available
The energy harvesting module based on the LTC3588 chip, which is a complete energy harvesting solution for sources such as piezoelectric, solar or magnetic transducers. SparkFun BOB-09946
zł163.09
24h
Available quantity: 1
Available
Pololu 2830
zł43.01
24h
Available quantity: 4
Available
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025
zł43.96
24h
Available quantity: 4
Available
DC-DC Step-Up converter U3V40F7 with an output voltage of 7.5 V, an input voltage of 1.3 to 7.5 V and a maximum output current of 4 A. Pololu 4014
zł44.74
24h
Available quantity: 4
Available
DFR0379
zł23.39
24h
Available quantity: 8
Available
A power supply based on a DC-DC converter with a current capacity of up to 6.1 A. The input voltage can range from 6 V to 30 V, while the output voltage is adjustable from 0 V to 36 V. Enclosure version. XYL3606S
zł193.42
24h
Available quantity: 4
Available
Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A
zł9.73
4 weeks
No product available!
DC-DC Buck Converter 5–36 V with 5 V or 3.3 V output in the DC5-36-TO-DC3V3-5-M version is equipped with terminal and pin headers for quick deployment in power applications. High efficiency, adjustable voltage, and compact size make it suitable for powering microcontrollers, communication modules, and embedded systems.
zł14.50
4 weeks
No product available!
DC-DC step-down converter module 5V 16A used to convert energy from 6-24V input voltage to stable 5V, providing up to 16A current. Thanks to high conversion efficiency (over 90%) and low ripple (<20mV), it is ideal for powering sensitive devices in applications such as robotics, drones or LED lighting systems. Additionally, built-in overheating and short-circuit protection mechanisms ensure reliable operation even in difficult conditions. DFRobot DFR1202
zł56.40
24h
Available quantity: 6
Available
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 5 V. Designed for mounting on a PCB. Hi-Link HLK-PM01
zł14.90
24h
Available quantity: 28
Available
Step-Down converter with adjustable output voltage from 1.25 to 36 V, input voltage from 4 to 38 V and maximum current up to 5 A. Board equipped with a voltmeter with display