6V, 5.5A Step-Down Voltage Regulator D42V55F6
ID: 1199017
5902186322912
zł116.42
Tax included
zł94.65 tax excl.
A step-down converter that reduces the input voltage from 6V to 60V to a stable 6V with up to 95% efficiency and 5.5A output current. It offers low standby current (<0.2mA), soft-start, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5573
Description
The D42V55F6 voltage regulator is a high-performance synchronous buck (step-down) converter designed to step down input voltages of up to 60 V to a stable 6 V. It features low no-load current consumption (<0.2 mA), making it energy-efficient even in standby mode. Its compact size allows installation in space-constrained environments. The D42V55F6 is an ideal solution for microprocessor systems, IoT devices, automation, and hobby projects where stable 6 V power with high efficiency and safe operation is required.
Thanks to switching technology (SMPS, DC-DC), the converter offers significantly higher efficiency (up to 95%) compared to traditional linear regulators, minimizing energy loss and heat generation. This model can deliver a continuous output current from 4 A to 8 A at low input voltages, providing stable power even for demanding circuits. The unit includes reverse voltage protection, overcurrent protection, and thermal shutdown, ensuring high reliability in harsh operating conditions. The soft-start function limits inrush current and smoothly ramps up the voltage at startup, protecting connected devices.
The converter offers a set of pins for flexible integration into a power system. VOUT provides the regulated 6 V output, while GND serves as the common ground reference. VIN is used to supply the input voltage, with the minimum operating voltage depending on the output voltage and dropout. The VRP pin outputs the input voltage after reverse voltage protection — it can serve as an output for powering other devices or as an alternative input bypassing this protection. Additionally, there is a PG (Power Good) pin — an open-drain output indicating proper output voltage — and an EN pin, which allows enabling or disabling the converter, including in low-power mode.
Features
- Input voltage: 6 V to 60 V
- Output voltage: 6 V ±3%
- Maximum continuous output current: from 4 A to 8 A (depending on input voltage)
- Efficiency: up to 95% (typically 70%–95%)
- Switching frequency: ~400 kHz
- No-load current consumption: < 0.2 mA
- Low-power mode (ENABLE): < 0.1 mA
- ENABLE input for remote on/off control
- Power-Good output for voltage monitoring
- Soft-start function to limit inrush current
- Reverse voltage protection
- Overcurrent and thermal protection
- Dimensions: 25.4 x 25.4 x 9 mm
- Three mounting holes 0.086″ (for #2 or M2 screws)
1199017
Data sheet
- Output voltage
- 6.0V
- Output current
- 8 A
- Converter type
- Step-down
- Supply voltage min
- 6 V
- Supply voltages max
- 60 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 13612
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 17926
Available
Other products in the same category (16)
A step-down converter module that allows you to reduce the input voltage from 9.2–36V to a stable 9V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows you to power microcontrollers, IoT modules, and other electronics. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5596
zł11.94
24h
Available quantity: 5
Available
A step-down converter module that allows for input voltage reduction from 7.6-36V to a stable 7.5V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5595
zł11.94
24h
Available quantity: 5
Available
A step-down converter module that allows for input voltage reduction from 6.1–36V to a stable 6V level, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5594
zł11.94
24h
Available quantity: 5
Available
A step-down converter module that allows you to reduce the input voltage from 5.1–36 V to a stable 5 V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600 mA allows you to power microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5593
zł11.89
24h
Available quantity: 10
Available
A step-down converter module that allows you to reduce the input voltage from 4–36 V to a stable 3.3 V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600 mA allows you to power microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5592
zł11.70
24h
Available quantity: 4
Available
The step-down converter module allows you to reduce the voltage from 24-60 V to a stable 24 V at a current of up to 8 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5684
zł220.12
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 18-60V to a stable 18V at a current of up to 8A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5681
zł220.03
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 15-60V to a stable 15V at a current of up to 8A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5679
zł220.03
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 12-60V to a stable 12V at a current of up to 9A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5677
zł225.80
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 9-60V to a stable 9V at a current of up to 10A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5676
zł220.03
24h
Available quantity: 1
Available
The step-down converter module allows for voltage reduction from 8.4–60 V to a stable 8.4 V at currents up to 10 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5675
zł214.97
24h
Available quantity: 1
Available
The step-down converter module allows for voltage reduction from 7.5–60 V to a stable 7.5 V at currents up to 10 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5674
zł214.97
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 6-60V to a stable 6V at a current of up to 11A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5673
zł209.63
24h
Available quantity: 2
Available
The step-down converter module allows for voltage reduction from 5.3-60V to a stable 5.3V at currents up to 11A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5672
zł214.97
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 5-60V to a stable 5V at a current of up to 11A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5671
zł225.00
24h
Available quantity: 1
Available
This step-down converter module allows you to reduce the voltage from 3.5-60V to a stable 3.3V at a current of up to 12A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5670
zł222.68
24h
Available quantity: 2
Available
A step-down converter that reduces the input voltage from 6V to 60V to a stable 6V with up to 95% efficiency and 5.5A output current. It offers low standby current (<0.2mA), soft-start, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5573