Step-Down converter module 15V/2.7A D30V30F15
ID: 1188217
5906623469321
zł82.24
Tax included
zł66.86 tax excl.
DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897
Description
DC-DC Step-Down converter module. It offers a constant output voltage of 15 V and can be powered with a voltage ranging from 15 to 45 V. It has a built-in output current limitation, and in continuous mode it has an efficiency of up to 2.7 A depending on the input voltage.
The module has an efficiency of 80% to 95%. It has a number of built-in protections, including input current limiting, undervoltage lockout and thermal shutdown.
Connections
- PG - Open drain output which goes low when the regulator output voltage increases more than 7.5% above or drops more than 9% below the nominal voltage
- VIN - input voltage
- GND - ground
- VOUT - output voltage
- EN - turning on the converter
Features
- Output voltage: 15 V with an accuracy of 4%
- Input voltage: 15V to 45V
- Efficiency from 80% to 95%, depending on the input voltage and load
- Low Power Mode (EN Input)
- Switching frequency: 700 kHz
- No-load quiescent current 10 to 20 uA per volt
- Switching current limitation
- Output current in continuous mode from 1.5A to 3.2A
- Protections: against overheating, soft start function, overvoltage lock
- Dimensions: 17.8 x 20.3 x 9 mm
Kit contains
- Converter module
- Goldpin male straight 6-pin connector
- Goldpin male angled 5-pin connector
1188217
Data sheet
- Output voltage
- 15V
- Output current
- 2,7 A
- Converter type
- Step-down
- Supply voltage min
- 15 V
- Supply voltages max
- 45 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 402
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 113
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.10
24h
Available quantity: 809
Available
Other products in the same category (16)
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł8.18
4 weeks
No product available!
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł4.31
24h
Available quantity: 688
Available
Pololu 2830
zł44.46
24h
Available quantity: 5
Available
No product available!
No product available!
Available
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł88.84
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł91.16
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 9 A.
zł139.57
24h
Available quantity: 1
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł114.06
24h
Available quantity: 7
Available
Step-Down Voltage Regulator D24V25F5. Pololu 2850
zł87.03
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847
zł35.76
24h
Available quantity: 1
Available
The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.
zł34.02
24h
Available quantity: 2
Available
DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897