Step-Down converter module 12V/2.8A D30V30F12
ID: 1188216
5906623469314
zł88.33
Tax included
zł71.81 tax excl.
DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896
Description
DC-DC Step-Down converter module. It offers a constant output voltage of 12 V and can be powered with a voltage ranging from 12 to 45 V. It has a built-in output current limitation, and in continuous mode it has an efficiency of up to 2.8 A depending on the input voltage.
The module has an efficiency of 80% to 95%. It has a number of built-in protections, including input current limiting, undervoltage lockout and thermal shutdown.
Connections
- PG - Open drain output which goes low when the regulator output voltage increases more than 7.5% above or drops more than 9% below the nominal voltage
- VIN - input voltage
- GND - ground
- VOUT - output voltage
- EN - turning on the converter
Features
- Output voltage: 12 V with an accuracy of 4%
- Input voltage: 12 V to 45V
- Efficiency from 80% to 95%, depending on the input voltage and load
- Low Power Mode (EN Input)
- Switching frequency: 700 kHz
- No-load quiescent current 10 to 20 uA per volt
- Switching current limitation
- Output current in continuous mode from 1.5A to 3.5A
- Protections: against overheating, soft start function, overvoltage lock
- Dimensions: 17.8 x 20.3 x 9 mm
Kit contains
- Converter module
- Goldpin male straight 6-pin connector
- Goldpin male angled 5-pin connector
1188216
Data sheet
- Output voltage
- 12V
- Output current
- 2,8 A
- Converter type
- Step-down
- Supply voltage min
- 12 V
- Supply voltages max
- 45 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.35
24h
Available quantity: 371
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 92
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 154
Available
Other products in the same category (16)
A step-down converter that reduces the input voltage from 8.4V to 60V to a stable 8.4V with up to 95% efficiency and up to 8.4A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5575
zł120.68
4 weeks
No product available!
Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796
zł21.44
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
A synchronous step-down converter that reduces input voltage from 18V to 60V to a stable 18V with up to 95% efficiency and 4A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5578
zł120.68
4 weeks
No product available!
The Step-Down Converter Module converts 4-40V to a regulated output voltage of 1.25-36V, supporting a maximum of 8A and 200W, with a conversion efficiency of 94%. It is a compact device (61 x 41 x 27 mm) using PWM modulation, ideal for industrial applications requiring a stable output voltage.
zł12.12
24h
Available quantity: 7
Available
The very small step-down 6 V, 2.5 A synchronous inverter can be supplied with voltage up to 36 V, dimensions: 17.8 mm x 17.8 mm. Pololu 2859
zł87.23
4 weeks
No product available!
DC-DC step-down converter module 12V 12A used to convert energy from 15-24V input voltage to stable 12V, providing up to 12A current. Thanks to high conversion efficiency (over 90%) and low ripple (<50mV), it is ideal for powering sensitive devices in applications such as robotics, drones or LED lighting systems. Additionally, built-in overheating and short-circuit protection mechanisms ensure reliable operation even in difficult conditions. DFRobot DFR1208
zł68.94
24h
Available quantity: 4
Available
This step-down converter module allows you to reduce the voltage from 3.5-60V to a stable 3.3V at a current of up to 12A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5670
zł229.73
6 weeks
No product available!
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025
zł43.96
24h
Available quantity: 6
Available
A step-down converter that reduces input voltage from 24V to 60V to a stable 24V with up to 95% efficiency and 4A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5579
zł120.68
4 weeks
No product available!
This step-down converter module allows you to reduce the voltage from 6-60V to a stable 6V at a current of up to 11A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5673
zł229.73
6 weeks
No product available!
A step-down converter that reduces the input voltage from 6V to 60V to a stable 6V with up to 95% efficiency and 5.5A output current. It offers low standby current (<0.2mA), soft-start, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5573
zł120.68
4 weeks
No product available!
An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.8 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4853
zł109.36
24h
Available quantity: 5
Available
Step-Down converter D36V28F5 with an output voltage of 5 V, an input voltage from 5.3 to 50 V and a maximum output current of 4 A. Pololu 3782
zł80.90
24h
Available quantity: 2
Available
The Step-Down converter module converts the input voltage of 11 - 26 V to a constant 9 V, with a maximum output current of 3 A, recommended up to 1.1 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.31
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing for a maximum output current of 500 mA. Pololu 2843
zł32.50
24h
Available quantity: 4
Available
DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896