Step-Down Converter Module 4.2-15V 3A D30V30MAS
ID: 1190028
5906623486229
zł110.34
Tax included
zł89.71 tax excl.
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4875
Description
The Step-Down Converter D30V3x is a buck-type voltage regulator module that lowers output voltages from input voltages up to 45 V. It offers significantly higher efficiency compared to linear regulators, especially when there is a large difference between input and output voltages. This converter can handle continuous output currents ranging from 1 A to 4 A, depending on the input and output voltages. The module allows for output voltages from 4.2 V to 15 V thanks to an 11-turn potentiometer.
The converter is equipped with protection against reverse voltage up to 40 V, an input undervoltage lockout, and protection against overcurrent and short circuits. Additionally, the over-temperature protection feature prevents damage from overheating, while the soft start function limits inrush current and gradually increases output voltage during startup.
Features
- Input voltage (VOUT): up to 45 V
- Output voltage: 4.2 V to 15 V
- Maximum continuous output current: 1 A to 4 A
- Efficiency: 80% to 95%, depending on input voltage, output voltage, and load
- Very low voltage drop
- Switching frequency: ~700 kHz
- Energy-saving mode
- Low standby current
- Enable input for disconnecting the load and switching the regulator to a low power state
- "Power good" output indicates when the regulator is unable to maintain the proper output voltage
- Low voltage protection
- Soft start function
- Integrated reverse voltage protection up to 40 V, overcurrent and short-circuit protection, over-temperature shutdown
- Dimensions: 15.2 x 25.4 x 9 mm
- Two M2 mounting holes
Kit contains
- Converter module
- Connector kit
1190028
Data sheet
- Output voltage
- 4,2 - 15 V
- Output current
- 3A
- Converter type
- Step-down
- Supply voltage min
- 4,2 V
- Supply voltages max
- 45 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4874
zł127.37
24h
Available quantity: 3
Available
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4855
zł106.42
24h
Available quantity: 2
Available
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4854
zł127.35
24h
Available quantity: 3
Available
Other products in the same category (16)
Step-down DC-DC converter module that converts a 12 V or 11.1 V output voltage (e.g. from a lithium battery) to a voltage in the range of 1.8 V to 5.1 V. It has a power output of up to 60 W, and with an output current of up to 18 A, the module can be used to power a 5 m WS2812 RGB LED strip. DFRobot DFR1025
zł43.96
24h
Available quantity: 4
Available
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.32
24h
Available quantity: 57
Available
This step-down converter module allows you to reduce the voltage from 9-60V to a stable 9V at a current of up to 10A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device features built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5676
zł229.73
6 weeks
No product available!
The AC-DC converter module converts the voltage in the range of 90-264V AC to 12V DC with a maximum current of 600mA and a power of 3W. It is characterized by a long life (MTBF 100,000 h), a slow start of 50 ms, and a maximum input current of 0.2A.
zł14.60
24h
Available quantity: 7
Available
The Step-Down D24V3F9 Buck Voltage Regulator module gives the output voltage of 9V with a wide input voltage range of 11-42V and a maximum output current of 300 mA. Pololu 2099
zł34.77
4 weeks
No product available!
Step-Down RT8272 converter with adjustable output voltage in the range from 5 V to 12 V, input voltage from 5 to 24 V and a maximum output current of 3 A
zł9.23
24h
Available quantity: 14
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
This regulated DC-DC buck switching power supply supports an input voltage of 6 to 70 V and an output voltage of 0 to 60 V at up to 20 A. It features high-precision voltage and current displays and quick-select switches for standard voltages. The module features an intelligent cooling system and numerous safety features, making it a safe and reliable solution for precision powering electronics, battery testers, LED systems, and industrial applications. XY6020L
zł135.74
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
zł465.09
4 weeks
No product available!
DFR0379
zł23.39
24h
Available quantity: 8
Available
An efficient step-down converter that reduces the input voltage to 3.3 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltages from 3.3 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5372
zł22.60
24h
Available quantity: 3
Available
Step-Down converter module converts input voltage (5-23V) to adjustable output voltage (0-16.5V) with maximum current 3A, featuring high precision (1%) and efficiency (up to 95%). Compact size and display make it ideal for various applications, e.g. DIY projects
zł24.39
24h
Available quantity: 4
Available
Step-Down XL4005 converter module with adjustable output voltage in the range from 0.8 to 30 V with a wide input voltage range from 4.5 to 30 V and a maximum output current of 5 A
zł19.35
24h
Available quantity: 19
Available
Modular power supply with a power of 3 W, input voltage from 100 to 240 V and output voltage of 3.3 V. Designed for mounting on a PCB. Hi-Link HLK-PM03
zł14.77
4 weeks
No product available!
The Step-Down D24V6F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 600 mA. Pololu 2107
zł41.72
24h
Available quantity: 1
Available
Step-Down converter D36V50F6 with an output voltage of 6 V, an input voltage from 6.5 to 50 V and a maximum output current of 8 A. Pololu 4092
zł123.28
24h
Available quantity: 2
Available
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4875