Step-Down converter module 9V/2.9A D30V30F9
ID: 1188222
5906623477029
zł79.51
Tax included
zł64.64 tax excl.
DC-DC Step-Down converter module. It has an input voltage from 9 to 45 V, an output voltage of 9 V and a maximum output current of up to 2.9 A. Pololu 4895
Description
DC-DC Step-Down converter module. It offers a constant output voltage of 9 V and can be powered with a voltage ranging from 9 to 45 V. It has a built-in output current limitation, and in continuous mode it has an efficiency of up to 2.9 A depending on the input voltage.
The module has an efficiency of 80% to 95%. It has a number of built-in protections, including input current limiting, undervoltage lockout and thermal shutdown.
Connections
- PG - Open drain output which goes low when the regulator output voltage increases more than 7.5% above or drops more than 9% below the nominal voltage
- VIN - input voltage
- GND - ground
- VOUT - output voltage
- EN - turning on the converter
Features
- Output voltage: 9 V with an accuracy of 4%
- Input voltage: 9V to 45V
- Efficiency from 80% to 95%, depending on the input voltage and load
- Low Power Mode (EN Input)
- Switching frequency: 700 kHz
- No-load quiescent current 10 to 20 uA per volt
- Switching current limitation
- Output current in continuous mode from 2A to 3.5A
- Protections: against overheating, soft start function, overvoltage lock
- Dimensions: 17.8 x 20.3 x 9 mm
Kit contains
- Converter module
- Goldpin male straight 6-pin connector
- Goldpin male angled 5-pin connector
1188222
Data sheet
- Output voltage
- 9 V
- Output current
- 2,9 A
- Converter type
- Step-down
- Supply voltage min
- 9 V
- Supply voltages max
- 45 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.31
Delivery date unknown
No product available!
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 157
Available
Other products in the same category (16)
The AC-DC converter module converts the voltage in the range of 90-264V AC to 12V DC with a maximum current of 600mA and a power of 3W. It is characterized by a long life (MTBF 100,000 h), a slow start of 50 ms, and a maximum input current of 0.2A.
zł14.60
24h
Available quantity: 13
Available
DC-DC Step-Down converter module. It has an input voltage from 6 to 45 V, an output voltage of 6 V and a maximum output current of up to 3.3 A. Pololu 4893
zł88.33
24h
Available quantity: 1
Available
Step-Down converter module with an input voltage of up to 5.5 V, an output voltage of 3.3 V and an output current of 1.2 A (2 A instantaneous current). Adafruit 4711
zł20.01
24h
Available quantity: 2
Available
Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4854
zł127.35
24h
Available quantity: 3
Available
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł3.85
24h
Available quantity: 9
Available
Power module based on a DC-DC Step-Down converter with a current efficiency of up to 20 A. The output voltage is adjustable in the range from 0 V to 50 V. The power supply offers power up to 1000 W. WZ5020L
zł117.13
24h
Available quantity: 2
Available
AP3429A DC-DC Step-Down Converter Module with 3.3 V output voltage, 3.9 to 5.5 V input voltage and 2 A maximum output current. SparkFun COM-21337
zł30.74
24h
Available quantity: 2
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
zł82.07
24h
Available quantity: 2
Available
A step-down converter that reduces the input voltage from 6V to 60V to a stable 6V with up to 95% efficiency and 5.5A output current. It offers low standby current (<0.2mA), soft-start, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5573
zł120.68
4 weeks
No product available!
Step-Down converter with adjustable or constant output voltage from 0.8 to 17 V, input voltage from 4.5 to 24 V and a maximum current of up to 3 A
zł4.00
24h
Available quantity: 30
Available
Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885
zł469.56
24h
Available quantity: 1
Available
Step-Down RT8272 converter with adjustable output voltage in the range from 5 V to 12 V, input voltage from 5 to 24 V and a maximum output current of 3 A
zł9.10
4 weeks
No product available!
The 4-channel Step-Down Converter module converts voltages in the range of 13.5-30V to 3.3V, 5V, 12V or regulated 2-28V, with a maximum current of 3A per channel and a total power of 50W. It includes protections and shutdown functions and can operate in temperatures from -40°C to +85°C.
zł55.25
4 weeks
No product available!
The Step-Down converter module converts the input voltage of 14 - 26 V to a constant 12 V, with a maximum output current of 3 A, recommended up to 0.8 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.26
24h
Available quantity: 10
Available
No product available!
A synchronous step-down converter that reduces input voltage from 3.5 to 60 V to a stable 3.3 V with up to 95% efficiency and up to 6 A output current. It offers low standby current (<0.2 mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5570
zł120.68
4 weeks
No product available!
DC-DC Step-Down converter module. It has an input voltage from 9 to 45 V, an output voltage of 9 V and a maximum output current of up to 2.9 A. Pololu 4895