Isolated DC-DC Power Module - module with galvanic isolation of power supply 5V/3.3V, 200mA
ID: 1196550
5902186320888
zł19.43
Tax included
zł15.80 tax excl.
A module that provides a regulated, galvanically isolated power supply. It allows easy changing of the output voltage from 5 V to 3.3 V using the voltage selection pin (VSEL). Galvanic isolation between input and output effectively prevents problems related to ground loops and ground currents, ensuring stability and protection of the system. Pololu 5384
Description
This module provides adjustable, galvanically isolated power. By default, it generates a 5 V output voltage, but it can easily be switched to 3.3 V using the voltage select pin (VSEL). Thanks to the galvanic isolation between the input and output, the module effectively prevents issues related to ground loops and ground currents that can lead to unpredictable system behavior or even damage.
The module is based on the MPS MIE1W0505BGLVH chip, which provides 2.5 kVRMS isolation. This value guarantees high protection and reliability in challenging operating conditions. The PCB design ensures a minimal distance of 3.5 mm between the isolated sides, meeting the system's requirements. The module is particularly useful in applications requiring stable and isolated power supply voltages in the range of 3 V to 5.5 V. Its compact size makes it easy to mount on breadboards. The input power is provided through the VIN and GND1 pins, and the output power is provided through the VOUT and GND2 pins. The module also features over-temperature and short-circuit protection, ensuring long-lasting and safe operation in demanding conditions. With a simple enable pin (EN), the module can operate in low-power mode, making it an ideal solution for energy-saving projects.
Features
- Galvanic isolation between input and output
- Input voltage range: 3 V to 5.5 V
- Output voltage selection: 5 V or 3.3 V (default 5 V)
- Up to 180 mA (200 mA peak) output current at 5 V
- Up to 75 mA output current at 3 V
- Over-temperature and short-circuit protection
- Compatible with breadboards, mounting holes with 2.54 mm pitch
- Regulator efficiency below 50%, meaning the input power must be at least twice the output power
- Enable pin (EN) default enabled, can be used to switch the module to low-power mode
- Dimensions: 7.62 x 15.24 mm
1196550
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A module that provides galvanically isolated, bidirectional I²C communication and isolated power supply, protecting devices from misconnections and voltage differences. Thanks to the TI ISO1640B device, it supports data transfer up to 1.7 MHz, and the power supply isolation via MPS MIE1W0505BGLVH eliminates ground loops and interference. Pololu 5393
zł37.08
24h
Available quantity: 3
Available
A module that provides galvanically isolated, bidirectional I²C communication and isolated power supply, protecting devices from misconnections and voltage differences. Thanks to the TI ISO1640B device, it supports data transfer up to 1.7 MHz, and the power supply isolation via MPS MIE1W0505BGLVH eliminates ground loops and interference. Pololu 5392
zł33.39
24h
Available quantity: 3
Available
A module that provides galvanically isolated, bidirectional I²C communication (SDA and SCL lines), protecting devices from misconnections and voltage differences. Thanks to the TI ISO1640B chip, it supports data transfer up to 1.7 MHz. Pololu 5391
zł23.43
Delivery date unknown
No product available!
A module that provides galvanically isolated, bidirectional I²C communication (SDA and SCL lines), protecting devices from incorrect connections and voltage differences. Thanks to the TI ISO1640B chip, it supports data transfer up to 1.7 MHz. Pololu 5390
zł18.71
Delivery date unknown
No product available!
Other products in the same category (16)
DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. It is compatible with Polol 2133
zł9.05
24h
Available quantity: 56
Available
The 5 V relay module enables safe switching of high-voltage loads via microcontroller logic. Its compact size, mechanical durability, and wide operating conditions make it a versatile choice for automation, lighting control, and DIY electronics projects.
zł6.99
24h
Available quantity: 10
Available
The Step-Down Converter Module with Voltmeter and Ammeter offers a wide input and output voltage range, with a maximum output current of 12A and a power of 160W. It comes with advanced monitoring and protection features and its conversion efficiency is around 96%.
zł76.15
24h
Available quantity: 3
Available
No product available!
HDMI adapter with FFC connector. Designed for prototyping devices with HDMI interface. Waveshare HDMI Adapter Horizontal
zł8.52
24h
Available quantity: 28
Available
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with connectors for assembly. Pololu 5075
zł56.04
24h
Available quantity: 1
Available
USB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246
zł66.63
4 weeks
No product available!
Wireless data logger with LoRaWAN network communication. Dedicated to industrial long-distance data acquisition from sensors with RS485 interface, GPIO or analog output. Seeed Studio 114992872
zł319.00
24h
Available quantity: 1
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 9 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł22.62
4 weeks
No product available!
Module with 2 5 V relays with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL001
zł167.43
24h
Available quantity: 1
Available
The Step-Down D24V3F12 Buck Voltage Regulator module gives the output voltage of 12V with a wide input voltage range of 14.5-42V and a maximum output current of 300 mA. Pololu 2100
zł31.12
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
zł605.05
4 weeks
No product available!
Pololu G2 18v15 High Power is a miniature DC motor controller. Power supply for the controller: 6.5 ... 30 V. Current efficiency of the module: 15 A. The module has protection against back voltage and overvoltages. Pololu 1363
zł551.54
4 weeks
No product available!
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
zł24.51
24h
Available quantity: 3
Available
Pololu - 2511
zł41.29
24h
Available quantity: 1
Available
DC-DC Step-Down converter module with 5V output voltage and 1A output current. The module can be a replacement for the popular LM7805 regulator.
zł7.88
24h
Available quantity: 90
Available
A module that provides a regulated, galvanically isolated power supply. It allows easy changing of the output voltage from 5 V to 3.3 V using the voltage selection pin (VSEL). Galvanic isolation between input and output effectively prevents problems related to ground loops and ground currents, ensuring stability and protection of the system. Pololu 5384