Shunt regulator with a constant voltage of 13.2V, bypass resistance 1.33 Ohms and a total of 12 SMT shunt resistors on both sides of the PCB with the possibility of adding an external potentiometer to adjust the preset voltage. Pololu 3770

The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy. Pololu 3141

Module with a digital distance sensor with a range of up to 5 cm. It has a digital output that goes low when an object is detected. Pololu 4050

Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054

Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 220 rpm, torque 1,8kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3053

Step-Up/Step-Down DC-DC converter module. It has an input voltage of 2.8 to 22 V, an output voltage of 9 V and a maximum output of 2.5 A to 3.5 A. Pololu 4983

An upgraded version of Pololu\'s popular mobile robot. It is based on the Raspberry Pi RP2040 microcontroller and features an OLED display and a set of sensors. The assembled version. Pololu 5001

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5253

DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Kit with connectors for self-assembly. Pololu 5072

A set of two Pololu wheels with dimensions 60x8mm in red. Intended for Micro servos with 4.8mm diameter spline and 20 teeth. Pololu 4911

A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with connectors for assembly. Pololu 5075

Module with 13 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4213

This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489

Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789

A two-channel DC motor controller with a I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.6 A per motor. Board with connectors for assembly. Pololu 5079

Step-down voltage regulator module based on the APM81815 providing a fixed 5 V output at up to 1.1 A with an input voltage range of 5.05 - 72 V. Pololu 5267

The step-down converter module allows you to reduce the voltage from 24-60 V to a stable 24 V at a current of up to 8 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5684

Chassis construction kit for the Pololu 3pi+ 32U4 robot. It enables the construction of a mobile robot with a differential drive based on the selected micro Pololu motor and electronics. Pololu 3725

Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845

Step-Down converter D36V50F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 9.5 A. Pololu 4090