Motoron M3H550 Triple Motor Controller - 3-channel DC motor controller for Raspberry Pi (for assembly)
ID: 1185703
5902186316904
zł138.87
Tax included
zł112.90 tax excl.
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Kit with connectors for self-assembly. Pololu 5072
Description
DC motor driver dedicated to Raspberry Pi boards. It allows you to control the movement of three drives using the I2C interface. It can work with motors with a supply voltage from 1.8 to 22 V and has a capacity of up to 1.7 A per motor (continuous operation). The controller has a built-in protection in the event of loss of communication with RPI and the ability to configure the response if an error occurs. The user can set the maximum acceleration and the starting speed of the motor, and the shield construction allows you to connect the drivers with each other. The manufacturer's website includes a user manual and a library with sample programs.
Features
- Operating voltage range: 1.8 V to 22 V
- Maximum output current per motor: 1.7 A continuous, 5 A instantaneous
- Voltage range of the logic part: 2.8 V to 5.5 V
- Control interface: I2C
- I2C clock frequency: up to 400 kHz
- CRC control capability
- Configurable motion parameters:
- Maximum acceleration/deceleration
- Initial speed
- Delay for change of direction
- PWM frequency: eight options available from 1 kHz to 80 kHz
- Protection in case of communication loss
- Configurable automatic error response
- Measurement of motor supply voltage (VIN)
- Possibility to power the Raspberry Pi directly or via an external stabiliser (not supplied)
- Two status LEDs
- Motor direction LEDs
Kit contains
- Motoron M3H550 Triple Motor Controller module
- 2 x spacer
- 2 x screw and nut
- Set of connectors
1185703
Data sheet
- Compatible with
- Raspberry Pi 4/3/2 B/A, Zero/Zero W/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 106
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
Other products in the same category (16)
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753
zł56.83
24h
Available quantity: 1
Available
Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119
zł245.34
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5048
zł354.03
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5055
zł605.06
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be supplied with 6.5-36V voltage and can draw a maximum current of 18A. Pololu 3756
zł423.01
4 weeks
No product available!
Raspberry Pi Expansion Board, DC Motor / Stepper Motor Driver
zł115.66
24h
Available quantity: 2
Available
This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors.
zł221.88
24h
Available quantity: 3
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5051
zł354.03
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5053
zł305.06
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5057
zł459.97
4 weeks
No product available!
HAT with two-channel DC motor driver for Raspberry Pi. It has an operating voltage from 6 to 24 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron HAT-MDD10
zł117.32
24h
Available quantity: 1
Available
The Bus Servo Driver HAT (A) with the ESP32-WROOM-32 microcontroller enables simultaneous control of up to 253 ST and RSBL servos, supporting both wired and wireless communication in robotic applications. Designed for integration with Raspberry Pi, it features 5 V power supply from a converter and full support for UART and USB-C transmission. JSON command handling and automatic WiFi network startup allow for remote control and easy integration with various development environments. Ideal for robotic arm projects, walking robots, and other constructions requiring multiple servos with closed-loop control.
zł81.03
24h
Available quantity: 3
Available
DC motor driver that allows you to control the movement of three drives using the I2C interface. Connectors for self-assembly. Pololu 5034
zł210.27
24h
Available quantity: 1
Available
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Pololu 5073
zł107.29
24h
Available quantity: 2
Available
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
zł605.05
4 weeks
No product available!
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
zł155.91
24h
Available quantity: 1
Available
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Kit with connectors for self-assembly. Pololu 5072