New products
New products
Available
Available
Available
Available
Available
Available
DC & Stepper Motor Bonnet - module with motor drivers for Raspberry Pi
ID: 587322
5906623430819
zł133.02
Tax included
zł108.15 tax excl.
HAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280
Description
The module with the driver of motors TB6612FNG and the driver PWM PCA9685 designed for minicomputers Raspberry Pi. It is equipped with a 40-pin connector, making it compatible with all versions of the minicomputer. On the board there are two double H-bridge systems and a system with PWM outputs, thanks to which it is possible to control four DC motors simultaneously or two stepper motors. The module will be used in projects using a DC motor drive, e.g. in the construction of a two-wheeled vehicle or home automation. Full documentation with examples is available on the product page.
Features
- Raspberry Pi 40-pin GPIO connector
- I2C interface
- I2C address configurable with 5 jumpers (up to 32 modules can be connected)
- The built-in PCA9685 chip provides 12-bit hardware PWM for motor speed regulation
- Two TB6612FNG double H-bridge motor controllers
- Current capacity 1.2 A per motor (3 A temporary)
- Reserved I2C control pins allow you to work with other control boards
- Power supply: 5 V to 12 V (VIN)
- Logic voltage: 3.3 V
- Dimensions: 65.2 x 30.6 x 14 mm
587322
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.99 Delivery date unknown No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł277.00 24hAvailable quantity: 166 AvailableThe long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł362.90 24hAvailable quantity: 12 Available
Other products in the same category (16)
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5054
zł584.79 6 weeks No product available!
HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751
zł310.16 6 weeks No product available!
The module with a 4-channel L293D DC motor driver, designed to work with the Raspberry Pi. It can work with a voltage from 6 to 24 V and a current of up to 600 mA. SB Components 08001
zł84.48 24hAvailable quantity: 1 AvailableHAT with two-channel DC motor driver for Raspberry Pi. It has an operating voltage from 6 to 24 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron HAT-MDD10
zł117.32 24hAvailable quantity: 2 AvailableAdafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (Adafruit 2327)
zł103.18 24hAvailable quantity: 3 AvailableDC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5051
zł318.35 6 weeks No product available!
Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119
zł193.00 24hAvailable quantity: 1 AvailableDC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033
zł209.48 24hAvailable quantity: 1 AvailableDC motor driver that allows you to control the movement of three drives using the I2C interface. Connectors for self-assembly. Pololu 5034
zł186.32 24hAvailable quantity: 1 AvailableDC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5055
zł556.93 6 weeks No product available!
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
zł168.35 24hAvailable quantity: 1 AvailableModule with a 2-channel driver for DC motors TB6612FNG designed to work with the Raspberry Pi. It can work with voltages from 6 to 12 V and currents up to 3 A. SB Components 21468
zł91.17 24hAvailable quantity: 2 AvailableModule with 16-channel PCA9685 servo driver designed for Raspberry Pi minicomputers. The board is equipped with a USB Type C power connector. SparkFun DEV-15316
zł62.90 24hAvailable quantity: 1 AvailablePololu Dual G2 High-Power Motor Driver 24v18 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be supplied with 6.5-36V voltage and can draw a maximum current of 18A. Pololu 3756
zł706.52 6 weeks No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5048
zł318.35 6 weeks No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5049
zł295.54 6 weeks No product available!
HAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280