Stepper motor driver HAT (B) for Raspberry Pi - Waveshare 22311
ID: 1180719
5906623426645
zł78.58
Tax included
zł63.89 tax excl.
Extension module with a driver for two stepper motors based on the HR8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT (B)
Description
Extension module with a driver for two stepper motors based on the HR8825 system. It allows you to control drives with a working voltage from 8.2 V to 28 V with a maximum current of 2.5 A, regulated by a potentiometer. Built-in switches allow you to select microstepping from full step to 1/32 step.
| 1. Raspberry Pi GPIO | 5. Power supply interface 8,2 - 28 V |
| 2. Motor interface | 6. Motor power switch |
| 3. MP1482 power chip | 7. DIP switch |
| 4. HR8825 motor driver | 8. Potentiometer |
The module has protection against overload, overheating and too low voltage, and the 5 V stabilizer allows you to directly power the RPi minicomputer from the expansion board. The board has a 40-pin connector compatible with Raspberry Pi and Jetson Nano. It will be used in projects using stepper motors, incl. 3D printers, plotters and home automation. Full documentation and sample programs are available on the product page.
Features
- 40-pin GPIO connector compatible with Raspberry Pi and Jetson Nano
- Built-in HR8825 driver
- Controlling two stepper motors with microstepping: full-step, half-step, 1/4-step, 1/8-step, 1/16-step and 1/32-step
- Adjustable maximum current with a potentiometer (max. 2.5 A)
- Protection against overload, overheating and under voltage
- Built-in 5V stabilizer
- The supply voltage of the motors: 8.2 V to 28 V
- Supply voltage of the logic part: 3.3 V
- Dimensions: 65 x 56 mm
Kit contains
- Stepper Motor HAT (B)
- A set of screws
- Radiator
1180719
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 148
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 119
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,028.98
24h
Available quantity: 4
Available
Other products in the same category (16)
The core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader. This version does not include any through-hole components or connectors, allowing for customized assembly or standalone use. Pololu 3118
zł197.60
24h
Available quantity: 2
Available
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753
zł56.83
24h
Available quantity: 1
Available
PCA9685 servo controller module dedicated to Raspberry Pi minicomputers. Allows control of 16 PWM channels. Waveshare Servo Driver HAT (B)
zł67.28
4 weeks
No product available!
The official extension module (HAT) dedicated to the Raspberry Pi. It allows you to control LEGO SPIKE Prime motors and service LEGO sensors. Raspberry Pi SC0622
zł183.42
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5057
zł459.97
4 weeks
No product available!
Dual MAX14870 Motor Driver is a dual DC driver compatible with Raspberry Pi that allows you to control two DC motors with 4.5-36V continuous current of 1.7A. Pololu 3759
zł143.97
24h
Available quantity: 1
Available
DFRobot 0592 is a Raspberry Pi DC motor driver board with built-in encoder interface that can drive a 2-way DC motor and a DC motor with encoder
zł71.22
24h
Available quantity: 1
Available
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
zł84.38
4 weeks
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Pololu 5035
zł179.27
24h
Available quantity: 2
Available
Extension module for Raspberry Pi. It allows you to control two DC motors, support encoders, 4 servos, IMU 9DoF and connect Qwiic modules. SparkFun ROB-16328
zł186.59
3 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
zł605.05
4 weeks
No product available!
Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119
zł245.34
24h
Available quantity: 1
Available
PiFace Relay Motor Control Extra (Board) for Raspberry Pi
zł89.00
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5058
zł431.43
4 weeks
No product available!
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 Voperating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.
zł315.67
24h
Available quantity: 2
Available
Raspberry Pi Expansion Board, DC Motor / Stepper Motor Driver
zł115.66
24h
Available quantity: 2
Available
Extension module with a driver for two stepper motors based on the HR8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT (B)