- Obecnie brak na stanie
 
        
           
         
          Ethernet board with mini SD card slot based on W5100 controller for Arduino system
Arduino Ethernet Shield W/OUT POE
 Ethernet board with mini SD card slot based on W5100 controller for Arduino system
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. 
 The R3 version brings to this shield the 1.0 standard pinout that consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future uses. 
 The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). It also adds a separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.
Features:
Contents:
Kabel sieciowy Ethernet Patchcord UTP 5E o długości 2 m. Kolor czerwony, ze złączami RJ45. Lanberg Z22990
 Brak towaru
 Brak towaru
 Brak towaru
 Brak towaru
 Brak towaru
Wyświetlacz E-Ink o rozdzielczości 264x176 pikseli i przekątnej 2,7 cala. Pozwala na wyświetlanie trzech kolorów: czarnego, czerwonego oraz białego. Wyświetlacz posiada wbudowany kontroler, komunikacja odbywa się za pomocą interfejsu SPI. Waveshare 2.7inch e-Paper (B)
 Brak towaru
 Brak towaru
KAmodRPI RS485 CAN HAT to nakładka dla komputera Raspberry Pi rozszerzająca jego interfejsy o RS485 oraz CAN. Sygnały magistral wyprowadzone są na złącza goldpin oraz szybkozłącza.
 Brak towaru
 Brak towaru
 Brak towaru
 Brak towaru
 Brak towaru
Wyświetlacz 2x24, 118x36 mm, FSTN, rozszerzony zakres temperatury "fast"
 Brak towaru
 Brak towaru
 Brak towaru
 Brak towaru
 
                    Ethernet board with mini SD card slot based on W5100 controller for Arduino system