Tracked chassis kit for the Pololu Zumo minisumo robot. The kit does not contain motors, batteries and electronic components. Pololu 1418

Aluminum Standoff 1.25" 4-40 M-F 4-Pack

Tamiya Plug with 10cm Leads, Female

A miniature lidar distance sensor that detects objects up to 200 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (30 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5491

The Step-Up NCP1402 Buck Voltage Regulator module with output  voltage 3.3V, input voltage range of 0.8-3.3V and a maximum output current of 200 mA. Pololu 2114

The FT90R is a digital micro servo that has been built by FEETECH specifically for continuous rotation, offering an inexpensive and easy way to get your small turret spinning or miniature robot moving, especially when paired with 60×8mm wheels designed specifically for this servo. 

Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4855

The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.

The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.

Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g

Motor with 20 mm diameter and 46 mm length, 250:1 metal gear, 12 V operating voltage, 0.08 A to 1.6 A power consumption, 55 RPM speed and 14 kg*cm maximum torque. Pololu 3494

Motor with 20 mm diameter and 46 mm length, 488:1 metal gear, 12 V operating voltage, 0.08 A to 1.6 A power consumption, 28 RPM speed and 25 kg*cm maximum torque. Pololu 3497

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink.

This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 Voperating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. 

The P-Star 45K50 Mini SV is a small programmable module featuring Microchip’s PIC18F45K50 microcontroller. It packs a Micro-USB interface and 30 digital input/output pins onto a board measuring 2″ × 0.7″ and ships preloaded with a USB bootloader, so no external programmer is required.

Stepper motor driver based on TB67S249FTG. It allows you to control a stepper motor with voltage from 10 to 47V, with a maximum current of 1.8A. The controller can be controlled using: USB, Serial TTL, I2C, RC (PWM modeling), analog input or quadrature encoder. Pololu 3138

Kit for tracks drive construction. It consists of silicone tracks and plastic gears and a set of screws. Pololu 3033

Kit for tracks drive construction. It consists of silicone tracks and plastic gears and a set of screws. Pololu 3032

The VM-CLAP1 Hand Clap Sensor from Verbal Machines is a low-power, microprocessor-based audio sensor that can detect hand claps or finger snaps while ignoring background noises such as human speech or music. Pololu 2580

Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. Pololu 3428