QTR-HD-02RC - module with 2 reflectance sensor with RC (digital) output
ID: 572381
5906623478828
zł14.77
Tax included
zł12.01 tax excl.
Module with 2 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4102
Description
Reflectance sensor consisting of array 2 QTR optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are high density (HD) and the distance between them is 4 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 32 mA. The optimum distance from the sensor to the ground is 5 mm and the maximum distance is 30 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTR
- Number of sensors: 2
- Sensor pitch: 4 mm (distance between individual sensors)
- Full brightness LED current: 30 mA (regardless of the supply voltage)
- Maximum module current: 32 mA
- Output signal: digital I/O-compatible signals that can be read in parallel as timed high pulses
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 30 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 10,2 × 20,0 × 2,5 mm
- Weight: 0,6 g
572381
Data sheet
- Type of sensor
- QRE
- Output type
- digital
- Number of sensors
- 2
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A compact line-tracing board designed for Raspberry Pi Pico, BBC micro:bit, and Arduino projects. Equipped with three phototransistors, it generates an analog output voltage proportional to the substrate\'s color, enabling precise control of autonomous vehicles. The board is solderless and ready to use, with a standard 2.54mm connector for easy integration with prototype breadboards. Kitronik 5337
zł20.93
24h
Available quantity: 2
Available
QTR-1RC Reflectance Sensor (2-Pack)
zł25.22
4 weeks
No product available!
Module with 4 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4304
zł35.83
24h
Available quantity: 1
Available
Module with 9 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4209
zł49.84
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4353
zł120.76
24h
Available quantity: 1
Available
Reflection sensor module with 1 QTRXL-HD optocoupler with analogue output. The module is powered by 2.9 ... 5.5V voltage, detects objects at a distance of up to 80mm. Pololu 4641
zł15.42
24h
Available quantity: 1
Available
This module can be applied to intellectual robot, obstacle avoidance car, counter device in the pipeline, black and white lines tracking device. This infrared sensor contains two parts: an infrared transmitter and an infrared receiver.
zł14.80
24h
Available quantity: 9
Available
Module with 11 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4211
zł61.75
24h
Available quantity: 1
Available
Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4441
zł18.14
24h
Available quantity: 3
Available
Module with 31 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4431
zł276.06
4 weeks
No product available!
Front sensor module of the Zumo 32U4 robot. It is included as part of the Zumo 32U4 robot kit and built into the assembled versions of the Zumo 32U4 robot. The set includes additional infrared connectors and LEDs. Pololu 3122
zł109.10
4 weeks
No product available!
Module with 2 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4202
zł14.69
24h
Available quantity: 1
Available
Module with 4 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4344
zł37.72
24h
Available quantity: 1
Available
A reflective sensor that precisely measures the intensity of light reflected from a surface using an IR LED and a phototransistor. It offers a long detection range—optimally around 20 mm, and up to 80 mm—thanks to the QTRXL sensor with a built-in lens and adjustable LED brightness. It generates a digital RC signal that\'s easily read by microcontrollers like Arduino or Raspberry Pi. Pololu 4540
zł16.36
6 weeks
No product available!
ROB-09454 - QRE1113 Line Sensor Breakout - Digital
zł29.59
3 weeks
No product available!
Available
Module with 2 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4102