zł39.00
Stepper motor NEMA23 - unipolar/bipolar, 200 steps/rev, 5.7V, 1A
ID: 210488
zł304.18
Tax included
zł247.30 tax excl.
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 5.7 V, and has a current consumption of 1 A per coil. Pololu 1476
Description
Stepper motor with a resolution of 200 steps/revolution (1.8° per step). Can be used as unipolar or bipolar motor. It is supplied with the voltage of 5.7 V, while the current consumption is a maximum of 1 A per coil. It has a holding moment of 4 kg-cm. The cord is not terminated with any plug.
Features
- Resolution: 200 steps/rev. (1.8° per step)
- Current consumption per coil: 1 A.
- Rated voltage: 5.7V
- The time kept: 4 kg-cm
- Coil resistance: 5.7 Ω (per coil)
- Winding inductance: 5.4 mH per coil
- Shaft diameter: 6.35 mm
- Shaft type: D
- Dimensions: 56.4 x 41 mm (NEMA 23)
- Cable length: 30 cm
- Weight: 450 g
210488
Data sheet
- Shaft diameter
- 6,35 mm
- Resolution
- 200 step/rev
- Torque
- 4 kg-cm
- Coil resistance
- 5,7 Ω
- Coil current
- 1000 mA
- Inductance of the coil
- 5,4 mH
- Voltage
- 5,7 V
- Weight
- 450 g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688
zł42.45
24h
Available quantity: 3
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł287.59
24h
Available quantity: 3
Available
Tic T500 USB Multi-Interface Stepper Motor Controller
zł134.39
24h
Available quantity: 2
Available
STSPIN220 stepper motor driver module with a low voltage range of 1.8...10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2877
zł49.21
24h
Available quantity: 1
Available
Other products in the same category (16)
A set consisting of a stepper motor driver module based on the ULN2003 system and a stepper motor powered with 5V voltage.
zł12.85
24h
Available quantity: 12
Available
NEMA23 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 2.8 A per coil. 57BYGH76
zł134.02
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 6.3 V, and draws a current of 0.3 A per coil. Pololu 2294
zł630.67
4 weeks
No product available!
Miniature stepper motor with a 100:1 metal gear offers high precision movement and increased torque, making it a suitable choice for projects requiring precise positioning, such as mobile robots, dispensing mechanisms or laboratory devices. The compact design and wide supply voltage range enable integration in complex mechatronic systems. DFRobot FIT0503
zł28.25
24h
Available quantity: 4
Available
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 4.1 V and draws a current of 0.7 A per coil. 17HS4023
zł43.85
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.9 V, and draws a current of 0.6 A per coil. Pololu 1204
zł235.77
24h
Available quantity: 2
Available
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473
zł390.51
4 weeks
No product available!
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
zł534.89
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 0.67 A per coil. Pololu 1206
zł242.61
4 weeks
No product available!
NEMA 17 stepper motor with a resolution of 200 steps per revolution. It is powered by 5.3 V and provides a torque of 27 N-cm. It has a "D"-shaped shaft with a diameter of 5 mm, which facilitates installation and ensures a secure connection with other elements of the system. QSH4218-35-10-027
Regular pricezł334.34zł263.95
24h
Available quantity: 40
Available
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil
zł53.55
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.3 V, and consumes up to 0.8 A per coil. Pololu 2256
zł251.15
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), a rated voltage of 12 V, and consumes up to 0.5 A per coil. JK42HS40-0504
zł66.03
4 weeks
No product available!
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2267
zł220.60
24h
Available quantity: 2
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200
zł260.59
24h
Available quantity: 5
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 1 A per coil. Pololu 2297
zł437.89
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 5.7 V, and has a current consumption of 1 A per coil. Pololu 1476